{"title":"Engine, gearbox \u0026 swap for Golf MK2","description":"\u003cp\u003eEngine and gearbox mounts, hydraulic clutch, driveshafts, 02A, 02J and 02M gearboxes and kits for 1.8T, VR6, R32 and 16V swaps in Golf MK2, Jetta 2 and Corrado.\u003c\/p\u003e","products":[{"product_id":"kit-completo-de-conversion-a-caja-de-5-velocidades-02a-02j-golf-mk2-y-mk3","title":"Full 02A\/02J 5-Speed Gearbox Conversion Kit for Golf MK2 and MK3","description":"\u003cp\u003eFull kit for the engine and transmission conversion in Golf MK2 and MK3, compatible with \u003cstrong\u003eG60, 16V, VR6, TDI and 1.8T\u003c\/strong\u003e engines. Essential if you want to fit gearboxes from later models (Golf MK3\/MK4) while keeping the \u003cstrong\u003emechanical cable clutch\u003c\/strong\u003e, avoiding the complexity of installing a hydraulically-operated gearbox.\u003c\/p\u003e\u003cp\u003eThe kit includes the \u003cstrong\u003egenuine VW clutch release bearing\u003c\/strong\u003e, reference \u003cstrong\u003e02A 141 708 B\u003c\/strong\u003e, a part discontinued by VW but a 100% fit for the 5-speed 02A and 02J gearboxes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePackage contents:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1x genuine VW clutch release bearing\u003c\/strong\u003e, for fitting 02A and 02J gearboxes on G60, VR6 and 1.8T engines | Ref. \u003ccode\u003e02A 141 708 B\u003c\/code\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e1x clutch cable\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e1x clutch cable counter-bracket\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eComplete the conversion with the \u003ca href=\"\/en\/products\/reinforced-rear-gearbox-mount-02a-02j-golf-2-3-corrado-passat-jetta-vento\"\u003ereinforced 02A\/02J rear gearbox mount\u003c\/a\u003e. Want to go to 6-speed? Check out the \u003ca href=\"\/en\/products\/mount-kit-vr6-r32-golf-4-swap-02m-golf-mk2-mk3\"\u003e02M gearbox mount kit\u003c\/a\u003e. Not sure which gearbox suits you? We can go over it in \u003ca href=\"\/en\/products\/classic-vw-swap-project-consulting\"\u003ea consulting session\u003c\/a\u003e.\u003c\/p\u003e","brand":"Epytec","offers":[{"title":"Default Title","offer_id":57798200361308,"sku":"VWS-PT-58268","price":177.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0883\/5265\/3660\/files\/vw-golf-2-3-lagerbock-mechanische-kupplung-g60-vr6-18t-02a-getriebe-112_1.avif?v=1780597248"},{"product_id":"soporte-trasero-de-caja-de-cambios-reforzado-02a-02j-5-marchas-golf-2-3-corrado-passat-jetta-vento-357199353a","title":"Reinforced Rear Gearbox Mount 02A\/02J 5-Speed Golf 2 \/ 3, Corrado, Passat, Jetta, Vento (357199353A)","description":"\u003cp\u003eReinforced rear gearbox mount for \u003cstrong\u003e5-speed 02A\/02J\u003c\/strong\u003e gearbox conversions in VW \u003cstrong\u003eGolf 2, Golf 3, Corrado, Passat, Jetta and Vento\u003c\/strong\u003e, compatible with 4 and 6-cylinder engines. Made from \u003cstrong\u003ehigh-strength steel\u003c\/strong\u003e replacing the original aluminium mount (reference \u003cstrong\u003e357199353A\u003c\/strong\u003e), far more resistant to engine torque and vibration than the original.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e high-strength steel (reinforced)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOriginal reference:\u003c\/strong\u003e 357199353A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 5-speed 02A\/02J gearbox conversions\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePairs with the \u003ca href=\"\/en\/products\/02a-02j-5-speed-gearbox-conversion-kit-golf-mk2-mk3\"\u003e02A\/02J gearbox conversion kit for Golf MK2 and MK3\u003c\/a\u003e. Going for 6-speed? Check out the \u003ca href=\"\/en\/products\/mount-kit-vr6-r32-golf-4-swap-02m-golf-mk2-mk3\"\u003e02M gearbox mount kit\u003c\/a\u003e.\u003c\/p\u003e","brand":"Epytec","offers":[{"title":"Default","offer_id":59104725631324,"sku":"EPY-1086","price":99.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0883\/5265\/3660\/files\/golf-2-getriebehalter-hinten-5-gang-02a-02j-getriebe-umbau-357199353a-motor-4-und-6-zylinder-1086.jpg?v=1789284446"},{"product_id":"contrasoporte-cable-embrague-caja-02a-02j-cda-golf-mk1-mk2-mk3","title":"Clutch cable counter-bracket for 02A, 02J or CDA gearbox on Golf MK1, MK2 and MK3","description":"\u003cp\u003eThe 5-speed gearboxes from Golf 3 and Golf 4 come stock with a hydraulic clutch. This counter-bracket lets you run them with a cable instead, saving you a hydraulic conversion, with no cutting into the bodywork or pedal box, and you can go back to stock whenever you want.\u003c\/p\u003e\u003cp\u003eFits Golf 1, 2 and 3, Passat, Corrado, Jetta and Vento with a 16V, 1.8T, G60, VR6 or TDI engine and an 02A, 02J or CDA gearbox. It's not meant for high-load performance clutches — if you're running a reinforced pressure plate, go hydraulic instead. Supplied with a material certificate.\u003c\/p\u003e\u003cp\u003eYou'll need the \u003ca href=\"\/en\/products\/original-vw-clutch-cable-c357721335e-02a-gearbox-swap-g60-vr6-1-8t\"\u003eoriginal VW C357721335E clutch cable, 1.34m\u003c\/a\u003e, which is the one that matches this setup. On the MK1, the alternative is the \u003ca href=\"\/en\/products\/mechanical-clutch-adapter-02a-golf-mk1-caddy-scirocco-g60-vr6-1-8t\"\u003emechanical clutch adapter for the 02A gearbox\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eIf this is your first swap and you don't know where to start, in the \u003ca href=\"\/en\/products\/classic-vw-swap-project-consulting\"\u003eswap consulting session\u003c\/a\u003e we'll put together the full parts list for you.\u003c\/p\u003e","brand":"Epytec","offers":[{"title":"Default Title","offer_id":59871554601308,"sku":"EPY-116","price":33.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0883\/5265\/3660\/files\/vw-golf-1-2-3-gegenhalter-fr-kupplungsszug-umbau-16v-18t-vr6-g60-getriebesttze-116-2.jpg?v=1794498726"},{"product_id":"tubo-hidraulico-embrague-trenzado-108-cm-02a-02j-02m-golf-mk1-mk2-mk3","title":"108cm braided clutch hydraulic line for 02A, 02J or 02M gearbox conversion on Golf MK1, MK2 and MK3","description":"\u003cp\u003e108cm braided stainless steel clutch hydraulic line, with an M12x1 fitting bent at 90 degrees and an M10x1 internal thread. Connects the clutch master cylinder to the slave cylinder when converting to an 02A, 02J, 02M or 02Q gearbox on Golf 1, 2 and 3, Corrado, Vento, Scirocco or Caddy.\u003c\/p\u003e\u003cp\u003eOn the MK1 it works if the clutch master cylinder is from a Golf 3. Being braided, it doesn't expand, so pedal pressure stays more consistent. On a Golf 3 there may be some extra length left over — it coils up fine.\u003c\/p\u003e\u003cp\u003eTo connect it to the Golf 4 slave cylinder you'll need the \u003ca href=\"\/en\/products\/m10x1-adapter-nipple-golf-4-slave-cylinder-hydraulic-clutch-golf-mk1-mk2-mk3\"\u003eM10x1 adapter nipple\u003c\/a\u003e. On the MK2, everything's bundled in the \u003ca href=\"\/en\/products\/full-hydraulic-clutch-conversion-kit-golf-mk2-jetta-corrado-passat\"\u003ehydraulic clutch kit for the MK2\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eIf this is your first swap and you don't know where to start, in the \u003ca href=\"\/en\/products\/classic-vw-swap-project-consulting\"\u003eswap consulting session\u003c\/a\u003e we'll put together the full parts list for you.\u003c\/p\u003e","brand":"Epytec","offers":[{"title":"Default Title","offer_id":59871622267228,"sku":"EPY-SF108","price":90.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0883\/5265\/3660\/files\/vw-golf-1-2-3-corrado-jetta-vento-hydraulik-leitung-umbau-6-gang-02m-02q-5-gang-02a-02j-getriebe-SF108.jpg?v=1794498826"},{"product_id":"bombin-embrague-1j0721261d-conversion-hidraulico-02a-02j-02m","title":"Clutch slave cylinder 1J0721261D for hydraulic clutch conversion with 02A, 02J or 02M gearbox","description":"\u003cp\u003eClutch slave cylinder from the Golf 4, A3, Leon and Octavia, part number 1J0721261D. It's the one fitted on 02A, 02J and 02M gearboxes, so you'll need it for any hydraulic clutch conversion on a Golf 1, 2, 3 or Jetta.\u003c\/p\u003e\u003cp\u003eThe bleed screw is plastic — tighten it carefully when bleeding.\u003c\/p\u003e\u003cp\u003ePairs with the \u003ca href=\"\/en\/products\/full-hydraulic-clutch-conversion-kit-1-8t-swap-golf-mk1-cabrio-caddy\"\u003ehydraulic clutch kit for the MK1\u003c\/a\u003e. And to connect the line, the \u003ca href=\"\/en\/products\/m10x1-adapter-nipple-golf-4-slave-cylinder-hydraulic-clutch-golf-mk1-mk2-mk3\"\u003eM10x1 adapter nipple\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eNot sure which combination suits your engine and gearbox? We'll go through it in a \u003ca href=\"\/en\/products\/classic-vw-swap-project-consulting\"\u003eswap consulting session\u003c\/a\u003e before you buy anything.\u003c\/p\u003e","brand":"Epytec","offers":[{"title":"Default Title","offer_id":59871642714460,"sku":"EPY-1050","price":39.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0883\/5265\/3660\/files\/kupplungsnehmerzylinder-vw-golf-4-audi-a3-umbau-hydraulische-kupplung-1j0721261d-1050.jpg?v=1794498872"},{"product_id":"niple-adaptador-m10x1-bombin-golf-4-embrague-hidraulico-golf-mk1-mk2-mk3","title":"M10x1 adapter nipple for Golf 4 slave cylinder in hydraulic clutch conversion for Golf MK1, MK2 and MK3","description":"\u003cp\u003eSmall but essential: this M10x1-threaded nipple with stainless steel fittings replaces the original one on the Golf 4 slave cylinder (1J0721261D) so you can connect the hydraulic line without modifying anything. Includes its seal.\u003c\/p\u003e\u003cp\u003eFits Golf 1, 2 and 3, Corrado, Vento, Scirocco, Caddy, Jetta and Passat with an 02A, 02J, 02M or 02Q gearbox. On the MK1, with a Golf 3 clutch master cylinder.\u003c\/p\u003e\u003cp\u003ePair it with the \u003ca href=\"\/en\/products\/braided-clutch-hydraulic-line-108cm-02a-02j-02m-golf-mk1-mk2-mk3\"\u003e108cm braided clutch hydraulic line\u003c\/a\u003e. And if you're missing the slave cylinder, here's the \u003ca href=\"\/en\/products\/clutch-slave-cylinder-1j0721261d-hydraulic-conversion-02a-02j-02m\"\u003e1J0721261D clutch slave cylinder\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eNot sure it fits your project? We'll sort it out in a \u003ca href=\"\/en\/products\/classic-vw-swap-project-consulting\"\u003econsulting session\u003c\/a\u003e and save you from buying parts you won't use.\u003c\/p\u003e","brand":"Epytec","offers":[{"title":"Default Title","offer_id":59871642943836,"sku":"EPY-952","price":11.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0883\/5265\/3660\/files\/adapternippel-umbau-hydraulische-kupplung-vw-golf-1-2-3-nehmerzylinder-golf-4-audi-a3-seat-leon-02a-02j-02m-getriebe-1j0721261d-952.jpg?v=1794498873"},{"product_id":"cable-embrague-original-vw-c357721335e-caja-02a-swap-g60-vr6-1-8t","title":"Original VW clutch cable C357721335E, 1.34m, for 02A gearbox in G60, VR6 or 1.8T swap","description":"\u003cp\u003eOriginal VW clutch cable, part number C357721335E, 1.34m long. It's the one you need to run an 02A gearbox by cable in a Golf 1, Golf 2, Caddy 1 or Scirocco 1 with a G60, VR6 or 1.8T swap, without going hydraulic.\u003c\/p\u003e\u003cp\u003eFits with either the mechanical clutch adapter or the cable counter-bracket, depending on the car.\u003c\/p\u003e\u003cp\u003eOn the MK1 it's fitted together with the \u003ca href=\"\/en\/products\/mechanical-clutch-adapter-02a-golf-mk1-caddy-scirocco-g60-vr6-1-8t\"\u003emechanical clutch adapter for the 02A gearbox\u003c\/a\u003e. On the MK2 and MK3 the usual pairing is the \u003ca href=\"\/en\/products\/clutch-cable-counter-bracket-02a-02j-cda-golf-mk1-mk2-mk3\"\u003eclutch cable counter-bracket\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eIf this is your first swap and you don't know where to start, in the \u003ca href=\"\/en\/products\/classic-vw-swap-project-consulting\"\u003eswap consulting session\u003c\/a\u003e we'll put together the full parts list for you.\u003c\/p\u003e","brand":"Epytec","offers":[{"title":"Default Title","offer_id":59871643140444,"sku":"EPY-498","price":51.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0883\/5265\/3660\/files\/498P33zLD_jpg.jpg?v=1794498873"},{"product_id":"galga-reglaje-varillaje-cambio-caja-020-golf-mk1-mk2-mk3","title":"Shift linkage adjustment gauge for 020 4- and 5-speed gearbox on Golf MK1, MK2 and MK3","description":"\u003cp\u003eStainless steel gauge for adjusting the shift linkage on 020 4- and 5-speed gearboxes, equivalent to VAG tool 3104. If gears are hard to select after replacing bushings or the shifter, this dials it in in five minutes.\u003c\/p\u003e\u003cp\u003eIt fits into the guide with the lever in neutral, locates the reverse gear lug in the slot, and you tighten the clamp screw. Fits Golf 1, 2 and 3, Cabrio, Jetta, Passat, Scirocco, Corrado and Caddy 1.\u003c\/p\u003e\u003cp\u003eIf you're shortening throw too, pair it with the \u003ca href=\"\/en\/products\/adjustable-short-shifter-stainless-golf-mk1-jetta-caddy-scirocco\"\u003eadjustable short shifter\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eNot sure which combination suits your engine and gearbox? We'll go through it in a \u003ca href=\"\/en\/products\/classic-vw-swap-project-consulting\"\u003eswap consulting session\u003c\/a\u003e before you buy anything.\u003c\/p\u003e","brand":"Epytec","offers":[{"title":"Default Title","offer_id":59871643205980,"sku":"EPY-164","price":12.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0883\/5265\/3660\/files\/einstelllehre-020-getriebeeinstellungen-4-und-5-gang-vag-golf-1-2-3-schaltgestnge-164.jpg?v=1794498874"},{"product_id":"patin-deslizante-laton-cambio-cajas-02a-02j-02m-02q-1j0711550","title":"Brass selector mechanism slide pad for 02A, 02J, 02M and 02Q gearboxes (1J0 711 550)","description":"\u003cp\u003eThe stock selector mechanism slide pad (1J0 711 550) is plastic, wears down and ends up making the shifter feel loose. This one's machined from high-strength brass, slides better and doesn't develop play.\u003c\/p\u003e\u003cp\u003eFits all 5-speed 02A and 02J gearboxes and 6-speed 02M and 02Q. If you're fitting a used gearbox in your swap, this is one of those parts worth replacing before putting it in.\u003c\/p\u003e\u003cp\u003eFor the MK1 there's the \u003ca href=\"\/en\/products\/02a-02j-conversion-kit-1-8t-1-9tdi-golf-mk1-scirocco-caddy-1\"\u003efull 02A\/02J gearbox conversion kit for MK1\u003c\/a\u003e. And for MK2 and MK3 the \u003ca href=\"\/en\/products\/02a-02j-5-speed-gearbox-conversion-kit-golf-mk2-mk3\"\u003e02A\/02J gearbox conversion kit for MK2 and MK3\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eNot sure it fits your project? We'll sort it out in a \u003ca href=\"\/en\/products\/classic-vw-swap-project-consulting\"\u003econsulting session\u003c\/a\u003e and save you from buying parts you won't use.\u003c\/p\u003e","brand":"Epytec","offers":[{"title":"Default Title","offer_id":59871643631964,"sku":"EPY-775","price":64.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0883\/5265\/3660\/files\/02m-02q-6-gang-02a-02j-5-gang-schaltgetriebe-gleitstck-1j0-711-550-775.jpg?v=1794498875"},{"product_id":"bomba-embrague-357721401-conversion-hidraulico-golf-mk1-caddy-jetta-scirocco","title":"Clutch master cylinder 357 721 401 for hydraulic clutch conversion on Golf MK1, Caddy, Jetta and Scirocco","description":"\u003cp\u003eClutch master cylinder, part number 357 721 401, the one from the Passat 35i, Golf 2 GTI G60 and Corrado. It's the one called for by the hydraulic clutch conversion kits for Golf 1, Caddy, Scirocco and Jetta.\u003c\/p\u003e\u003cp\u003eFits onto the original pedal box using the kit's adapter.\u003c\/p\u003e\u003cp\u003ePairs with the \u003ca href=\"\/en\/products\/full-hydraulic-clutch-conversion-kit-1-8t-swap-golf-mk1-cabrio-caddy\"\u003ehydraulic clutch kit for the MK1\u003c\/a\u003e. Complete it with the \u003ca href=\"\/en\/products\/hydraulic-clutch-reservoir-golf-mk1-mk2-mk3\"\u003ehydraulic clutch fluid reservoir\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eNot sure it fits your project? We'll sort it out in a \u003ca href=\"\/en\/products\/classic-vw-swap-project-consulting\"\u003econsulting session\u003c\/a\u003e and save you from buying parts you won't use.\u003c\/p\u003e","brand":"Epytec","offers":[{"title":"Default Title","offer_id":59871688786268,"sku":"EPY-130","price":32.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0883\/5265\/3660\/files\/kupplungsgeberzylinder-passat-35i-golf-2-gti-g60-vw-corrado-geberzylinder-umbau-hydraulische-kupplung-357-721-401-130.jpg?v=1794498993"},{"product_id":"deposito-liquido-conversion-embrague-hidraulico-golf-mk1-mk2-mk3","title":"Reservoir for hydraulic clutch conversion on Golf MK1, MK2 and MK3, with hose and clamps","description":"\u003cp\u003eSeparate reservoir for the clutch fluid when converting from cable to hydraulic. It comes with a 40cm hose, so you can mount it wherever suits best in the engine bay, plus two band clamps.\u003c\/p\u003e\u003cp\u003eFits Golf 1, Cabrio, Caddy 14D, Jetta 1, Scirocco, and also MK2 and MK3.\u003c\/p\u003e\u003cp\u003ePairs with the \u003ca href=\"\/en\/products\/hydraulic-clutch-conversion-adapter-golf-mk1-cabrio-caddy-jetta-scirocco\"\u003ehydraulic clutch adapter\u003c\/a\u003e. And with the \u003ca href=\"\/en\/products\/clutch-master-cylinder-357721401-hydraulic-conversion-golf-mk1-caddy-jetta-scirocco\"\u003e357 721 401 clutch master cylinder\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eIf this is your first swap and you don't know where to start, in the \u003ca href=\"\/en\/products\/classic-vw-swap-project-consulting\"\u003eswap consulting session\u003c\/a\u003e we'll put together the full parts list for you.\u003c\/p\u003e","brand":"Epytec","offers":[{"title":"Default Title","offer_id":59871689343324,"sku":"EPY-473","price":17.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0883\/5265\/3660\/files\/ausgleichsbehlter-fr-umbau-auf-hydraulische-kupplung-golf-1-2-3-mit-schlauch-und-schellen-473.jpg?v=1794498994"},{"product_id":"kit-completo-conversion-embrague-hidraulico-golf-mk2-jetta-corrado-passat","title":"Full hydraulic clutch conversion kit for Golf 4 engine swap on Golf MK2, Jetta, Corrado and Passat","description":"\u003cp\u003eEverything you need to convert a Golf 2, Jetta, Corrado or Passat 35i to a hydraulic clutch when fitting a Golf 4, A3 or TT engine with an 02A, 02J, 02M or 02Q gearbox, with no pedal changes and no need to remove them to fit the adapter.\u003c\/p\u003e\u003cp\u003eIncludes clutch master cylinder, hydraulic line, adapter, nipple with seals, reservoir, 40cm hose, two stainless clamps and a pin. All you're missing is the slave cylinder 1J0721261D. To bleed it, remove the slave cylinder from the gearbox and pump it 10 to 20 times from the top with a vacuum pump.\u003c\/p\u003e\u003cp\u003eThe slave cylinder you need is the \u003ca href=\"\/en\/products\/clutch-slave-cylinder-1j0721261d-hydraulic-conversion-02a-02j-02m\"\u003e1J0721261D clutch slave cylinder\u003c\/a\u003e. If you're going 02A, also check the \u003ca href=\"\/en\/products\/02a-02j-5-speed-gearbox-conversion-kit-golf-mk2-mk3\"\u003e02A\/02J gearbox conversion kit for MK2 and MK3\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eNot sure which combination suits your engine and gearbox? We'll go through it in a \u003ca href=\"\/en\/products\/classic-vw-swap-project-consulting\"\u003eswap consulting session\u003c\/a\u003e before you buy anything.\u003c\/p\u003e","brand":"Epytec","offers":[{"title":"Default Title","offer_id":59871727911260,"sku":"EPY-918-BA","price":219.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0883\/5265\/3660\/files\/vw-golf-2-jetta-corrado-umbauset-golf-4-audi-a3-tt-motor-hydraulische-kupplung-918-BA.jpg?v=1794499083"},{"product_id":"adaptador-cable-acelerador-vr6-pedalier-golf-mk2-jetta-corrado-passat","title":"VR6 throttle cable adapter for Golf MK2, Jetta, Corrado and Passat pedal box","description":"\u003cp\u003eIn a VR6 swap on a Golf 2, Jetta, Corrado or Passat 35i, this aluminum adapter lets you fit the original Golf 3 VR6 throttle cable (1H0721555AA) to your car's pedal box. Takes about five minutes to install.\u003c\/p\u003e\u003cp\u003eIncludes hardware and certificate; the cable is sold separately.\u003c\/p\u003e\u003cp\u003eIf you're also going hydraulic, check the \u003ca href=\"\/en\/products\/full-hydraulic-clutch-conversion-kit-golf-mk2-jetta-corrado-passat\"\u003ehydraulic clutch kit for MK2\u003c\/a\u003e. And for the gearbox, the \u003ca href=\"\/en\/products\/02a-02j-5-speed-gearbox-conversion-kit-golf-mk2-mk3\"\u003e02A\/02J gearbox conversion kit for MK2 and MK3\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eNot sure it fits your project? We'll sort it out in a \u003ca href=\"\/en\/products\/classic-vw-swap-project-consulting\"\u003econsulting session\u003c\/a\u003e and save you from buying parts you won't use.\u003c\/p\u003e","brand":"Epytec","offers":[{"title":"Default Title","offer_id":59871727944028,"sku":"EPY-441","price":34.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0883\/5265\/3660\/files\/golf-2-jetta-corrado-passat-umbau-adapter-auf-golf-3-gaspedalzug-vr6-motorumbau-1-441.jpg?v=1794499084"},{"product_id":"soporte-caja-02m-6-marchas-golf-mk2-mk3-corrado-passat-jetta-vento","title":"6-speed 02M gearbox mount with starter motor support for Golf MK2, MK3, Corrado, Passat, Jetta and Vento","description":"\u003cp\u003eSet to fit the R32 or V6's 6-speed 02M gearbox with a 1.8T, a VR6 or a 16V on Golf 2 and 3, Passat, Corrado, Jetta and Vento. It bolts onto the original mount, so the gearbox stays in place with no welding to the body.\u003c\/p\u003e\u003cp\u003eIncludes the gearbox mount, the crossmember that stabilizes the starter motor, material certificate and instructions. Galvanized.\u003c\/p\u003e\u003cp\u003eIf you're fitting a VR6 or Golf 4 R32 engine, you want the \u003ca href=\"\/en\/products\/gearbox-mount-02m-swap-vr6-r32-golf-mk2-mk3-corrado-passat\"\u003e02M gearbox mount for VR6 and R32\u003c\/a\u003e. To drive the car with the 02M, you'll need the \u003ca href=\"\/en\/products\/driveshaft-set-02m-gearbox-golf-mk2-mk3-vr6-plus-axle\"\u003edriveshafts for the 02M with Plus axle\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eNot sure it fits your project? We'll sort it out in a \u003ca href=\"\/en\/products\/classic-vw-swap-project-consulting\"\u003econsulting session\u003c\/a\u003e and save you from buying parts you won't use.\u003c\/p\u003e","brand":"Epytec","offers":[{"title":"Default Title","offer_id":59874439725404,"sku":"EPY-282","price":87.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0883\/5265\/3660\/files\/6-gang-getriebehalter-02m-fr-golf-passat-corrado-g60-16v-vr6-getriebe-halter-dxw-drp-dqb-282.jpg?v=1794503111"},{"product_id":"soporte-caja-02m-swap-vr6-r32-golf-mk2-mk3-corrado-passat","title":"02M gearbox mount for Golf 4 VR6 or R32 swap on Golf MK2, MK3, Corrado, Passat, Jetta and Vento","description":"\u003cp\u003eGearbox mount to fit the 6-speed 02M alongside the Golf 4 VR6 or R32 on Golf 2 and 3, Passat, Corrado, Jetta and Vento. Bolts to the original mount, no welding, and is galvanized.\u003c\/p\u003e\u003cp\u003eNote: it doesn't work with the 02M from the Polo or other models with a different bellhousing — it has to be the Golf 4 R32 or VR6 version.\u003c\/p\u003e\u003cp\u003eIf you'd rather get the full engine and gearbox set, there's the \u003ca href=\"\/en\/products\/mount-kit-vr6-r32-golf-4-swap-02m-golf-mk2-mk3\"\u003eengine and 02M gearbox mount kit for MK2 and MK3\u003c\/a\u003e. For the engine side on the MK2, the \u003ca href=\"\/en\/products\/front-engine-mount-vr6-02m-02a-golf-mk2-mk3-passat-corrado\"\u003eVR6 front engine mount\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eIf this is your first swap and you don't know where to start, in the \u003ca href=\"\/en\/products\/classic-vw-swap-project-consulting\"\u003eswap consulting session\u003c\/a\u003e we'll put together the full parts list for you.\u003c\/p\u003e","brand":"Epytec","offers":[{"title":"Default Title","offer_id":59874440085852,"sku":"EPY-960","price":166.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0883\/5265\/3660\/files\/getriebehalter-golf-2-3-passat-corrado-jetta-vento-golf-4-r32-vr6-getriebe-umbau-halter-960.webp?v=1794503112"},{"product_id":"soporte-delantero-motor-4-cilindros-02a-02j-golf-mk2-passat-corrado","title":"Front engine mount for 4-cylinder swap with 02A or 02J gearbox on Golf MK2, Passat, Corrado and Vento","description":"\u003cp\u003eFront mount to fit any VAG 4-cylinder with a 5-speed 02A or 02J gearbox into a Golf 2, Passat, Corrado or Vento. Galvanized, with material certificate.\u003c\/p\u003e\u003cp\u003eTo fit it you'll also need the MK2 front reinforcement crossmember, which is what it bolts to.\u003c\/p\u003e\u003cp\u003eThe crossmember you need is the \u003ca href=\"\/en\/products\/front-reinforcement-crossmember-swap-vr6-1-8t-golf-mk2-jetta-corrado-passat\"\u003eMK2 front reinforcement crossmember\u003c\/a\u003e. For the subframe-mounted support, check the \u003ca href=\"\/en\/products\/subframe-engine-mount-steel-4-cylinder-02m-02a-golf-mk2-corrado-vento\"\u003e4-cylinder subframe engine mount\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eNot sure which combination suits your engine and gearbox? We'll go through it in a \u003ca href=\"\/en\/products\/classic-vw-swap-project-consulting\"\u003eswap consulting session\u003c\/a\u003e before you buy anything.\u003c\/p\u003e","brand":"Epytec","offers":[{"title":"Default Title","offer_id":59874440315228,"sku":"EPY-798","price":162.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0883\/5265\/3660\/files\/motorhalter-vw-golf-2-vorne-umbau-4-zylinder-motoren-5-gang-getriebe-02a-02j-798.jpg?v=1794503113"},{"product_id":"soporte-delantero-motor-vr6-02m-02a-golf-mk2-mk3-passat-corrado","title":"Front engine mount for VR6 swap with 02M or 02A gearbox on Golf MK2, MK3, Passat, Corrado and Vento","description":"\u003cp\u003eFront mount to fit a VR6 with the 6-speed 02M or the 5-speed 02A and 02J on Golf 2 and 3, Passat, Corrado and Vento. Includes its rubber bushing, high-strength hardware and certificate; galvanized.\u003c\/p\u003e\u003cp\u003eNeeds the front reinforcement crossmember fitted to have something to bolt to.\u003c\/p\u003e\u003cp\u003ePair it with the \u003ca href=\"\/en\/products\/front-reinforcement-crossmember-swap-vr6-1-8t-golf-mk2-jetta-corrado-passat\"\u003eMK2 front reinforcement crossmember\u003c\/a\u003e. For the rear subframe mount, there's the \u003ca href=\"\/en\/products\/subframe-engine-mount-steel-vr6-r32-golf-mk2-passat-corrado-vento\"\u003eVR6 subframe engine mount\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eNot sure it fits your project? We'll sort it out in a \u003ca href=\"\/en\/products\/classic-vw-swap-project-consulting\"\u003econsulting session\u003c\/a\u003e and save you from buying parts you won't use.\u003c\/p\u003e","brand":"Epytec","offers":[{"title":"Default Title","offer_id":59874440544604,"sku":"EPY-799","price":164.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0883\/5265\/3660\/files\/799-motorhalter-vw-golf2-vorne-umbau-6zylinder-motorenvr6-02m-6gang-02a-02j-5gang-getriebe-1gdg6FS_jpg.jpg?v=1794503113"},{"product_id":"soporte-motor-acero-subchasis-4-cilindros-02m-02a-golf-mk2-corrado-vento","title":"Steel subframe engine mount for 4-cylinder (1.8T, G60, 2.0 8V and 16V) with 02M or 02A gearbox on Golf MK2, Corrado and Vento","description":"\u003cp\u003eReplaces the cast aluminum mount and subframe bushing when fitting a 1.8T, a G60 or an 8- or 16-valve 2.0 into a Golf 2, Passat, Corrado or Vento. Works with both the 6-speed 02M and the 02A and 02J.\u003c\/p\u003e\u003cp\u003eHas the polyurethane bushing built in, so engine torque rock on gear changes is gone and you don't need the original rubber mount. Keeps the stock subframe mounting points. This version is for the Golf 2 subframe.\u003c\/p\u003e\u003cp\u003eFor the front mount, there's the \u003ca href=\"\/en\/products\/front-engine-mount-4-cylinder-02a-02j-golf-mk2-passat-corrado\"\u003e4-cylinder front engine mount\u003c\/a\u003e. If the engine is a VR6, you want the \u003ca href=\"\/en\/products\/subframe-engine-mount-steel-vr6-r32-golf-mk2-passat-corrado-vento\"\u003eVR6 subframe engine mount\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eIf this is your first swap and you don't know where to start, in the \u003ca href=\"\/en\/products\/classic-vw-swap-project-consulting\"\u003eswap consulting session\u003c\/a\u003e we'll put together the full parts list for you.\u003c\/p\u003e","brand":"Epytec","offers":[{"title":"Default Title","offer_id":59874440773980,"sku":"EPY-826","price":194.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0883\/5265\/3660\/files\/motorhalter-golf-corrado-vento-2-auf-4-zylinder-motoren-aus-stahl-18-t-g60-20l-8v-16v-02m-6--gang-02a--02j-5-gang-getriebe---hilfsrahmen-aggregatstrger-golf-2-826-MK2.jpg?v=1794503114"},{"product_id":"soporte-motor-acero-subchasis-vr6-r32-golf-mk2-passat-corrado-vento","title":"Steel subframe engine mount for VR6 and R32 with 02M or 02A gearbox on Golf MK2, Passat, Corrado and Vento","description":"\u003cp\u003eReplaces the aluminum mount 357 199 354K and the subframe bushing in VR6 or R32 swaps on Golf 2, Passat, Corrado and Vento, with the 6-speed or 5-speed 02M gearbox. Also built for turbo or supercharged VR6s, where the aluminum one tends to crack.\u003c\/p\u003e\u003cp\u003eThe built-in polyurethane bushing eliminates engine torque rock and you don't need the stock rubber mount. Keeps the original subframe mounting points. Version for the Golf 2 subframe.\u003c\/p\u003e\u003cp\u003eFor the front, there's the \u003ca href=\"\/en\/products\/front-engine-mount-vr6-02m-02a-golf-mk2-mk3-passat-corrado\"\u003eVR6 front engine mount\u003c\/a\u003e. If you want to keep the original rubber mount, check the \u003ca href=\"\/en\/products\/steel-vr6-engine-cradle-reinforced-golf-passat-corrado-vento\"\u003esteel VR6 engine cradle\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eNot sure which combination suits your engine and gearbox? We'll go through it in a \u003ca href=\"\/en\/products\/classic-vw-swap-project-consulting\"\u003eswap consulting session\u003c\/a\u003e before you buy anything.\u003c\/p\u003e","brand":"Epytec","offers":[{"title":"Default Title","offer_id":59874440806748,"sku":"EPY-818","price":202.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0883\/5265\/3660\/files\/passat-golf-2-corrado-vento-vr6-r32-motorhalter-stahl-02m-6--gang-und-5--gang-getriebe-turbo-kompressor-umbau---hilfsrahmen-aggregatstrger-golf-2-818-MK2.webp?v=1794503114"},{"product_id":"cuna-motor-vr6-acero-reforzado-golf-passat-corrado-vento","title":"Reinforced steel VR6 engine cradle for Golf, Passat, Corrado and Vento (357 199 354K)","description":"\u003cp\u003eST52 steel replica of the aluminum VR6 engine cradle (357 199 354K), with the same dimensions, so it's a direct 1:1 fit on any VR6. The aluminum one tends to crack when you turn up the power with a turbo or supercharger.\u003c\/p\u003e\u003cp\u003eIt's the same one we use in VR6 swaps on the Golf 1.\u003c\/p\u003e\u003cp\u003eIf you'd rather also do away with the subframe rubber mount, there's the \u003ca href=\"\/en\/products\/subframe-engine-mount-steel-vr6-r32-golf-mk2-passat-corrado-vento\"\u003eVR6 subframe engine mount\u003c\/a\u003e. For a VR6 on the MK1, the \u003ca href=\"\/en\/products\/vr6-engine-mount-kit-golf-mk1-caddy-scirocco-jetta\"\u003efull VR6 mount kit\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eNot sure it fits your project? We'll sort it out in a \u003ca href=\"\/en\/products\/classic-vw-swap-project-consulting\"\u003econsulting session\u003c\/a\u003e and save you from buying parts you won't use.\u003c\/p\u003e","brand":"Epytec","offers":[{"title":"Default Title","offer_id":59874457780572,"sku":"EPY-447","price":169.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0883\/5265\/3660\/files\/passat-golf-corrado-vento-stahl-vr6-motorhalter-turbo-kompressor-umbau-447.jpg?v=1794503165"},{"product_id":"travesano-refuerzo-frontal-swap-vr6-1-8t-golf-mk2-jetta-corrado-passat","title":"Front reinforcement crossmember for VR6 or 1.8T swap on Golf MK2, Jetta 2, Corrado and Passat","description":"\u003cp\u003eHigh-strength steel crossmember that reinforces the whole front end of the Golf 2, Jetta 2, Corrado and Passat when fitting a 4- or 6-cylinder engine. Prevents the typical cracking around the front end with heavier engines, leaves room for a big radiator, and you can jack the car up from it.\u003c\/p\u003e\u003cp\u003eIt's the base the MK2 front engine mounts bolt to.\u003c\/p\u003e\u003cp\u003eOn top goes the \u003ca href=\"\/en\/products\/front-engine-mount-4-cylinder-02a-02j-golf-mk2-passat-corrado\"\u003e4-cylinder front engine mount\u003c\/a\u003e. Or, for a VR6, the \u003ca href=\"\/en\/products\/front-engine-mount-vr6-02m-02a-golf-mk2-mk3-passat-corrado\"\u003eVR6 front engine mount\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eIf this is your first swap and you don't know where to start, in the \u003ca href=\"\/en\/products\/classic-vw-swap-project-consulting\"\u003eswap consulting session\u003c\/a\u003e we'll put together the full parts list for you.\u003c\/p\u003e","brand":"Epytec","offers":[{"title":"Default Title","offer_id":59874457813340,"sku":"EPY-480","price":428.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0883\/5265\/3660\/files\/quertrger-frontblech-verstrkung-vw-golf-2-jetta-2-corrado-passat-motorumbau-vr6-18t-02a-02j-02m-getriebe-480.jpg?v=1794503166"},{"product_id":"placa-refuerzo-acero-caja-02m-02q-6-marchas","title":"Steel reinforcement plate for 6-speed 02M and 02Q gearbox","description":"\u003cp\u003eUnder high torque, the 02M's shaft vibrates and can end up cracking the gearbox's cast housing. This galvanized S355 steel plate reinforces that area on all 6-speed 02M and 02Q gearboxes.\u003c\/p\u003e\u003cp\u003eComes with all the hardware.\u003c\/p\u003e\u003cp\u003eIf you want more complete reinforcement, there's the \u003ca href=\"\/en\/products\/full-reinforcement-plate-02m-02q-6-speed-gearbox\"\u003efull reinforcement plate for the 02M\u003c\/a\u003e. To hang the gearbox on MK2 and MK3, the \u003ca href=\"\/en\/products\/gearbox-mount-02m-6-speed-golf-mk2-mk3-corrado-passat-jetta-vento\"\u003e02M gearbox mount for MK2 and MK3\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eNot sure which combination suits your engine and gearbox? We'll go through it in a \u003ca href=\"\/en\/products\/classic-vw-swap-project-consulting\"\u003eswap consulting session\u003c\/a\u003e before you buy anything.\u003c\/p\u003e","brand":"Epytec","offers":[{"title":"Default Title","offer_id":59874457911644,"sku":"EPY-705","price":35.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0883\/5265\/3660\/files\/vw-audi-02m-6-gang-getriebe-verstrkung-getriebeverstrkung-blech-golf-1-2-3-4-vr6-r32-s3-705.jpg?v=1794503167"},{"product_id":"chapa-refuerzo-completa-caja-02m-02q-6-marchas","title":"Full reinforcement plate for 6-speed 02M and 02Q gearbox","description":"\u003cp\u003eBigger version of the gearbox reinforcement for the 6-speed 02M and 02Q, in galvanized S355 steel. For engines pushing a lot of torque, where the housing suffers from shaft vibration.\u003c\/p\u003e\u003cp\u003eIncludes hardware.\u003c\/p\u003e\u003cp\u003eIf something simpler works for you, check the \u003ca href=\"\/en\/products\/steel-reinforcement-plate-02m-02q-6-speed-gearbox\"\u003e02M reinforcement plate\u003c\/a\u003e. For 5-speed gearboxes, the \u003ca href=\"\/en\/products\/aluminum-bellhousing-reinforcement-02a-02j-5-speed-gearbox\"\u003e02A\/02J bellhousing reinforcement\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eNot sure it fits your project? We'll sort it out in a \u003ca href=\"\/en\/products\/classic-vw-swap-project-consulting\"\u003econsulting session\u003c\/a\u003e and save you from buying parts you won't use.\u003c\/p\u003e","brand":"Epytec","offers":[{"title":"Default Title","offer_id":59874458009948,"sku":"EPY-844","price":156.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0883\/5265\/3660\/files\/bxLvrt_jpg.jpg?v=1794503167"},{"product_id":"refuerzo-aluminio-campana-caja-02a-02j-5-marchas","title":"Aluminum bellhousing reinforcement for 5-speed 02A and 02J gearbox","description":"\u003cp\u003eHigh-strength aluminum reinforcement that bolts onto the weak point of the 02A and 02J gearbox bellhousing. With powerful engines, shaft vibration ends up cracking the casting; this prevents it.\u003c\/p\u003e\u003cp\u003eUses the holes the bellhousing already has: loosen the nuts, fit it, and tighten back up.\u003c\/p\u003e\u003cp\u003eIf you're running a reinforced pressure plate, also replace the \u003ca href=\"\/en\/products\/reinforced-clutch-release-lever-02a141709a-02a-02j-gearbox\"\u003ereinforced clutch release lever\u003c\/a\u003e. And while you're at it, fit the \u003ca href=\"\/en\/products\/brass-selector-slide-pad-gearbox-02a-02j-02m-02q-1j0711550\"\u003ebrass selector slide pad\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eIf this is your first swap and you don't know where to start, in the \u003ca href=\"\/en\/products\/classic-vw-swap-project-consulting\"\u003eswap consulting session\u003c\/a\u003e we'll put together the full parts list for you.\u003c\/p\u003e","brand":"Epytec","offers":[{"title":"Default Title","offer_id":59874458042716,"sku":"EPY-1265","price":70.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0883\/5265\/3660\/files\/vw-golf-1-2-3-02a-02j-5-gang-getriebeverstrkung-motorumbau-getriebeumbau-tuning-1265.jpg?v=1794503168"},{"product_id":"chapa-proteccion-carter-vr6-golf-mk1-mk2-mk3-corrado","title":"3mm sump guard for VR6 on Golf MK1, MK2, MK3 and Corrado","description":"\u003cp\u003e3mm steel plate that reinforces the VR6 oil sump and protects it from impacts. On lowered cars the sump cracks easily — this puts an end to that.\u003c\/p\u003e\u003cp\u003eSimple install: remove the sump, fit the plate, done. Fits any car with a VR6.\u003c\/p\u003e\u003cp\u003eIf you're working on the VR6, also check the \u003ca href=\"\/en\/products\/steel-vr6-engine-cradle-reinforced-golf-passat-corrado-vento\"\u003esteel VR6 engine cradle\u003c\/a\u003e. And on the MK2, the \u003ca href=\"\/en\/products\/front-reinforcement-crossmember-swap-vr6-1-8t-golf-mk2-jetta-corrado-passat\"\u003eMK2 front reinforcement crossmember\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eNot sure which combination suits your engine and gearbox? We'll go through it in a \u003ca href=\"\/en\/products\/classic-vw-swap-project-consulting\"\u003eswap consulting session\u003c\/a\u003e before you buy anything.\u003c\/p\u003e","brand":"Epytec","offers":[{"title":"Default Title","offer_id":59874458108252,"sku":"EPY-862","price":16.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0883\/5265\/3660\/files\/golf-1-2-3-corrado-vr6-unterfahrschutz-verstrkungsblech-schutzblech-lwanne-vr6-schtzen-862.jpg?v=1794503168"},{"product_id":"palanca-desembrague-reforzada-02a141709a-caja-02a-02j","title":"Reinforced clutch release lever 02A141709A for 02A and 02J gearbox","description":"\u003cp\u003eWith a reinforced pressure plate, the original 02A and 02J clutch release lever reaches its limit and bends or snaps. This one has TIG-welded reinforcement plates on the inside at the weak points, and is galvanized.\u003c\/p\u003e\u003cp\u003eFor G60, VR6, 2.0 16V, GTI and TDI gearboxes on the Golf 2 and 3, Corrado and Passat, and for any swap using those gearboxes.\u003c\/p\u003e\u003cp\u003eIf you'd rather reinforce your own, there's the \u003ca href=\"\/en\/products\/weld-in-reinforcement-plates-clutch-release-lever-02a-gearbox\"\u003eweld-in reinforcement plates for the clutch release lever\u003c\/a\u003e. And for the bellhousing, the \u003ca href=\"\/en\/products\/aluminum-bellhousing-reinforcement-02a-02j-5-speed-gearbox\"\u003e02A\/02J bellhousing reinforcement\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eIf this is your first swap and you don't know where to start, in the \u003ca href=\"\/en\/products\/classic-vw-swap-project-consulting\"\u003eswap consulting session\u003c\/a\u003e we'll put together the full parts list for you.\u003c\/p\u003e","brand":"Epytec","offers":[{"title":"Default Title","offer_id":59874528231772,"sku":"EPY-720","price":66.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0883\/5265\/3660\/files\/ausrckhebel-verstrkt-02a-getriebe-02a141709a-golf-corrado-vr6-16v-1-2-3-4-720.jpg?v=1794503276"},{"product_id":"chapas-refuerzo-soldar-palanca-desembrague-caja-02a","title":"Weld-in reinforcement plates for the 02A gearbox clutch release lever","description":"\u003cp\u003eTwo high-strength steel plates to weld onto the 02A clutch release lever to stop it bending when fitting a reinforced pressure plate or clutch.\u003c\/p\u003e\u003cp\u003eFor G60, VR6, 2.0 16V, GTI and TDI gearboxes on the Golf 2 and 3, Corrado and Passat.\u003c\/p\u003e\u003cp\u003eIf you'd rather not weld, the \u003ca href=\"\/en\/products\/reinforced-clutch-release-lever-02a141709a-02a-02j-gearbox\"\u003ereinforced clutch release lever\u003c\/a\u003e already comes ready-made.\u003c\/p\u003e\u003cp\u003eNot sure which combination suits your engine and gearbox? We'll go through it in a \u003ca href=\"\/en\/products\/classic-vw-swap-project-consulting\"\u003eswap consulting session\u003c\/a\u003e before you buy anything.\u003c\/p\u003e","brand":"Epytec","offers":[{"title":"Default Title","offer_id":59874528264540,"sku":"EPY-432","price":16.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0883\/5265\/3660\/files\/432.jpg?v=1794503277"},{"product_id":"adaptador-conversion-embrague-hidraulico-golf-mk2-jetta-corrado-passat","title":"Hydraulic clutch conversion adapter for Golf 4 engine swap on Golf MK2, Jetta, Corrado and Passat","description":"\u003cp\u003eAdapter to convert a Golf 2, Jetta, Corrado or Passat 35i to a hydraulic clutch when fitting a Golf 4, A3 or TT engine. Keeps the stock pedals, and you don't even need to remove them to install it.\u003c\/p\u003e\u003cp\u003eThis is just the adapter: the master cylinder, line, nipple and reservoir are sold separately.\u003c\/p\u003e\u003cp\u003eIf you want it all bundled, there's the \u003ca href=\"\/en\/products\/full-hydraulic-clutch-conversion-kit-golf-mk2-jetta-corrado-passat\"\u003ehydraulic clutch kit for MK2\u003c\/a\u003e. The master cylinder it needs is the \u003ca href=\"\/en\/products\/clutch-master-cylinder-357721401-hydraulic-conversion-golf-mk1-caddy-jetta-scirocco\"\u003e357 721 401 clutch master cylinder\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eIf this is your first swap and you don't know where to start, in the \u003ca href=\"\/en\/products\/classic-vw-swap-project-consulting\"\u003eswap consulting session\u003c\/a\u003e we'll put together the full parts list for you.\u003c\/p\u003e","brand":"Epytec","offers":[{"title":"Default Title","offer_id":59874528362844,"sku":"EPY-918","price":92.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0883\/5265\/3660\/files\/vw-golf-2-corrado-passat-jetta-umbausatz-auf-hydraulische-kupplung-motor-umbau-golf-4-918.jpg?v=1794503278"},{"product_id":"niple-adaptador-bombin-embrague-golf-2-16v-g60-357721261a","title":"Adapter nipple for Golf 2 16V and G60 clutch slave cylinder (357721261A) in 02A, 02J or 02M gearbox conversion","description":"\u003cp\u003eNipple for the Golf 2 16V and G60 clutch slave cylinder (357721261A) that lets you connect the hydraulic line cleanly when fitting an 02A, 02J or 02M into a Golf 1, 2 or 3, Corrado or Vento.\u003c\/p\u003e\u003cp\u003eReplaces the original, and the line fits straight on.\u003c\/p\u003e\u003cp\u003eIf you're using the Golf 4 slave cylinder, you want the \u003ca href=\"\/en\/products\/m10x1-adapter-nipple-golf-4-slave-cylinder-hydraulic-clutch-golf-mk1-mk2-mk3\"\u003eM10x1 adapter nipple\u003c\/a\u003e. The line is the \u003ca href=\"\/en\/products\/braided-clutch-hydraulic-line-108cm-02a-02j-02m-golf-mk1-mk2-mk3\"\u003ebraided clutch hydraulic line\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eIf this is your first swap and you don't know where to start, in the \u003ca href=\"\/en\/products\/classic-vw-swap-project-consulting\"\u003eswap consulting session\u003c\/a\u003e we'll put together the full parts list for you.\u003c\/p\u003e","brand":"Epytec","offers":[{"title":"Default Title","offer_id":59874567815516,"sku":"EPY-1090","price":37.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0883\/5265\/3660\/files\/adapternippel-umbau-hydraulische-kupplung-vw-golf-1-2-3-nehmerzylinder-16v-g60-02a-02j-02m-getriebe-357721261a-1090.jpg?v=1794503331"},{"product_id":"juego-palieres-caja-02m-golf-mk2-mk3-eje-plus-vr6","title":"Driveshaft set for 02M gearbox conversion on Golf MK2 and MK3 with VR6 Plus axle (front-wheel drive)","description":"\u003cp\u003eDriveshaft set for Golf 2 and Golf 3 with the VR6 Plus axle, essential if you're converting to the 6-speed 02M or 02Q while keeping front-wheel drive. Solid shafts in special steel, rated up to 800hp.\u003c\/p\u003e\u003cp\u003eWhen fitting them, you need to avoid trapping pressure inside the CV boots — we'll send you the instructions.\u003c\/p\u003e\u003cp\u003eIf your car has the narrow axle, you want the \u003ca href=\"\/en\/products\/driveshaft-set-02m-gearbox-golf-mk2-jetta-2-narrow-axle\"\u003edriveshafts for the 02M with narrow axle\u003c\/a\u003e. For the gearbox, the \u003ca href=\"\/en\/products\/gearbox-mount-02m-6-speed-golf-mk2-mk3-corrado-passat-jetta-vento\"\u003e02M gearbox mount for MK2 and MK3\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eNot sure which combination suits your engine and gearbox? We'll go through it in a \u003ca href=\"\/en\/products\/classic-vw-swap-project-consulting\"\u003eswap consulting session\u003c\/a\u003e before you buy anything.\u003c\/p\u003e","brand":"Epytec","offers":[{"title":"Default Title","offer_id":59874568929628,"sku":"EPY-ISP116","price":337.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0883\/5265\/3660\/files\/antriebswelle-vorne-rechts-vw-golf-2-3-plusachse-umbau-02m-02q-6-gang-ISP116.jpg?v=1794503331"},{"product_id":"juego-palieres-caja-02m-golf-mk2-jetta-2-eje-estrecho","title":"Driveshaft set for 02M gearbox conversion on Golf MK2, Jetta 2 and Toledo 1 with narrow axle (no joints)","description":"\u003cp\u003eDriveshaft set for Golf 2, Jetta 2 and Toledo 1 with the narrow axle, to fit a VR6, 16V or 1.8T with the 6-speed 02M gearbox in front-wheel drive.\u003c\/p\u003e\u003cp\u003eSold without CV joints: the inner one is the 108mm Golf 4 joint and the outer one is the G60 joint. When fitting, avoid trapping pressure in the CV boots.\u003c\/p\u003e\u003cp\u003eIf your car has the Plus axle, you want the \u003ca href=\"\/en\/products\/driveshaft-set-02m-gearbox-golf-mk2-mk3-vr6-plus-axle\"\u003edriveshafts for the 02M with Plus axle\u003c\/a\u003e. For the engine, the \u003ca href=\"\/en\/products\/subframe-engine-mount-steel-4-cylinder-02m-02a-golf-mk2-corrado-vento\"\u003e4-cylinder subframe engine mount\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eNot sure it fits your project? We'll sort it out in a \u003ca href=\"\/en\/products\/classic-vw-swap-project-consulting\"\u003econsulting session\u003c\/a\u003e and save you from buying parts you won't use.\u003c\/p\u003e","brand":"Epytec","offers":[{"title":"Default Title","offer_id":59874572730716,"sku":"EPY-ISP111","price":363.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0883\/5265\/3660\/files\/antriebswelle-golf-2-18t-16v-vr6-turbo-antriebswellen-02m-6-gang-fwd-ohne-gelenke-ISP111.jpg?v=1794503331"},{"product_id":"palanca-cambio-corta-inox-golf-mk2-mk3-jetta-vento-passat","title":"Stainless short shifter for Golf MK2, MK3, Jetta, Vento, Passat and Toledo with rod linkage","description":"\u003cp\u003eShort shifter in 1.4301 stainless steel for Golf 2 and 3 (Cabrio included), Jetta, Vento, Passat and Toledo with rod-linkage shift. Cuts the throw by 50-70% depending on the mounting hole you pick.\u003c\/p\u003e\u003cp\u003eNot for cars with cable-shift gearboxes, and not for the Polo. Keeps the stock plastic bushing.\u003c\/p\u003e\u003cp\u003eAfterwards, set up the linkage with the \u003ca href=\"\/en\/products\/shift-linkage-adjustment-gauge-020-gearbox-golf-mk1-mk2-mk3\"\u003eshift linkage setting gauge\u003c\/a\u003e. For the MK1 there's the \u003ca href=\"\/en\/products\/adjustable-short-shifter-stainless-golf-mk1-jetta-caddy-scirocco\"\u003eadjustable stainless short shifter\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eNot sure which combo suits your engine and gearbox? We'll go through it in a \u003ca href=\"\/en\/products\/classic-vw-swap-project-consulting\"\u003eswap consultation\u003c\/a\u003e before you buy anything.\u003c\/p\u003e","brand":"Epytec","offers":[{"title":"Default Title","offer_id":59874718482780,"sku":"EPY-287","price":16.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0883\/5265\/3660\/files\/vw-golf-2-3-jetta-vento-passat-toledo-schaltwegverkrzung-short-shifter-gti-16v-287.jpg?v=1794503544"},{"product_id":"soporte-guia-cables-cambio-1j0711789-swap-golf-mk1-mk2-mk3","title":"Shift cable guide bracket 1J0711789 for cable-shift gearbox swaps in Golf MK1, MK2 and MK3","description":"\u003cp\u003eBrand-new shift cable guide bracket (1J0711789) from the Golf 3, Golf 4, Passat 35i and A3. It's been hard to find new for a while, and used ones are usually worn out.\u003c\/p\u003e\u003cp\u003eYou need it for any swap with a cable-shift gearbox — for example fitting a VR6, 16V or 1.8T into a Golf 1 or 2.\u003c\/p\u003e\u003cp\u003eOn the MK1, pair it with the \u003ca href=\"\/en\/products\/shifter-base-adapter-plate-02a-gearbox-golf-mk1-cabrio-caddy-jetta-scirocco\"\u003eshifter base adapter plate\u003c\/a\u003e. And the \u003ca href=\"\/en\/products\/brass-selector-slide-pad-gearbox-02a-02j-02m-02q-1j0711550\"\u003ebrass shift slider\u003c\/a\u003e to keep the shift linkage free of play.\u003c\/p\u003e\u003cp\u003eNot sure it fits your project? We'll sort it out in a \u003ca href=\"\/en\/products\/classic-vw-swap-project-consulting\"\u003econsultation\u003c\/a\u003e and save you from buying parts you won't use.\u003c\/p\u003e","brand":"Epytec","offers":[{"title":"Default Title","offer_id":59874718581084,"sku":"EPY-1208","price":36.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0883\/5265\/3660\/files\/schaltung-widerlager-fhrung-schaltseile-golf-3-passat-35i-corrado-1j0711789-1208.jpg?v=1794503544"},{"product_id":"adaptador-pedal-acelerador-electronico-golf-4-golf-mk2-mk3-corrado-passat","title":"Electronic throttle pedal adapter from Golf 4 for Golf MK2, MK3 VR6, Corrado and Passat","description":"\u003cp\u003eGolf 4, A3 and TT engines run an electronic throttle. This adapter lets you bolt the donor car's pedal straight onto the original brackets in your Golf 2, Golf 3 VR6, Corrado or Passat 35i pedal box.\u003c\/p\u003e\u003cp\u003eWe recommend using the pedal from the same car the engine came from, so the ECU reads it correctly.\u003c\/p\u003e\u003cp\u003eIf your engine runs a cable throttle instead, you want the \u003ca href=\"\/en\/products\/vr6-throttle-cable-adapter-pedal-box-golf-mk2-jetta-corrado-passat\"\u003eVR6 throttle cable adapter\u003c\/a\u003e. And for the clutch, the \u003ca href=\"\/en\/products\/full-hydraulic-clutch-conversion-kit-golf-mk2-jetta-corrado-passat\"\u003ehydraulic clutch conversion kit for the MK2\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eIf this is your first swap and you don't know where to start, our \u003ca href=\"\/en\/products\/classic-vw-swap-project-consulting\"\u003eswap consultation\u003c\/a\u003e gets you the full parts list.\u003c\/p\u003e","brand":"Epytec","offers":[{"title":"Default Title","offer_id":59874718613852,"sku":"EPY-863","price":79.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0883\/5265\/3660\/files\/golf-2-corrado-passat-umbau-gaspedal-adapter-fr-golf-4-dbw-r32-v6-tdi-6q1-723-503-k-gaszug-863.jpg?v=1794503545"},{"product_id":"palanca-corta-coolerworx-v2-pro-montaje-inferior-golf-mk2-jetta-mk2","title":"Coolerworx V2 Pro bottom-mount short shifter for Golf MK2 and Jetta MK2 with 02A, 02J, 02M or 02Q gearbox","description":"\u003cp\u003eThe V2 Pro redesigned for Golf 2 and Jetta 2 running a later gearbox. Mounts from underneath the car without touching the interior or any bodywork. Coolerworx developed its own mounting system that works even if you've already removed the original shifter's metal bracket.\u003c\/p\u003e\n\u003cp\u003eIt comes with a cover that keeps the original look and adds a coin tray. If you'd rather keep the stock cover, it fits too with no cutting required.\u003c\/p\u003e\n\u003cp\u003eImportant with the 02A gearbox (G60, VR6 and early 1.8T): this shifter only works with the \u003ca href=\"\/en\/products\/motorsport-hd-shift-cables-bottom-mount-02a-02j-02m\"\u003eMotorsport HD cables\u003c\/a\u003e, so you'll need to order them together. With any other 5- or 6-speed gearbox you can run the original cables or switch to the HD ones.\u003c\/p\u003e\n\u003cp\u003eMachined from aviation-grade 7075 aluminium with a 304 stainless steel base, CNC-machined and hand-assembled in Europe. This is the shifter Coolerworx develops and tests in competition, built to take a beating.\u003c\/p\u003e\n\u003cp\u003eWant the top-mount option or a slightly lower price? There's the \u003ca href=\"\/en\/products\/coolerworx-v1-pro-short-shifter-golf-mk2-jetta-mk2-02a-02j-02m\"\u003eV1 Pro for the MK2\u003c\/a\u003e. With the 020 rod-linkage gearbox, you want the \u003ca href=\"\/en\/products\/short-shifter-stainless-golf-mk2-mk3-jetta-vento-passat\"\u003eEpytec short shifter for the 020\u003c\/a\u003e. And if the shift slider is worn out, the \u003ca href=\"\/en\/products\/brass-selector-slide-pad-gearbox-02a-02j-02m-02q-1j0711550\"\u003ebrass shift slider\u003c\/a\u003e takes five minutes to swap.\u003c\/p\u003e\n\u003cp\u003eNot sure which gearbox you've got or which mount you need? We'll cover it in a \u003ca href=\"\/en\/products\/classic-vw-swap-project-consulting\"\u003econsultation\u003c\/a\u003e and tell you exactly which shifter and cables you need before you order.\u003c\/p\u003e","brand":"Coolerworx","offers":[{"title":"Golf MK2","offer_id":59877280612700,"sku":"CWX-V2-MK2-GOLF","price":849.9,"currency_code":"EUR","in_stock":true},{"title":"Jetta MK2","offer_id":59877280645468,"sku":"CWX-V2-MK2-JETTA","price":849.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0883\/5265\/3660\/files\/DSC_0325copy.jpg?v=1794509755"},{"product_id":"palanca-corta-coolerworx-v1-pro-golf-mk2-jetta-mk2-02a-02j-02m","title":"Coolerworx V1 Pro short shifter for Golf MK2 and Jetta MK2, 02A, 02J, 02M, MQ250, MQ350 and 02Q gearboxes","description":"\u003cp\u003eCoolerworx V1 Pro short shifter for Golf MK2 and Jetta MK2 with a cable-shift gearbox. Pick the mount type and the gearbox you're running in the variants: 02A, 02J, 02M, MQ250, MQ350 or 02Q. Short throws, precise feel, zero play.\u003c\/p\u003e\n\u003cp\u003eBottom-mount fixes under the tunnel like the stock shifter and is the usual choice with a well-sorted 02A, 02J or 02M swap. Top-mount routes the cables inside the cabin, solving the cases where the gearbox comes from a newer car and the cables don't reach from below.\u003c\/p\u003e\n\u003cp\u003eMachined from aviation-grade 7075 aluminium with a 304 stainless steel base, CNC-machined and hand-assembled in Europe. This is the shifter Coolerworx develops and tests in competition, built to take a beating.\u003c\/p\u003e\n\u003cp\u003eWith the 02A gearbox you can fit it with your original cables. If your cables are off a Golf 3 or Corrado — the sloppiest ones — we'd recommend switching to the \u003ca href=\"\/en\/products\/motorsport-hd-shift-cables-bottom-mount-02a-02j-02m\"\u003eMotorsport HD cables for bottom-mount\u003c\/a\u003e or the \u003ca href=\"\/en\/products\/motorsport-hd-shift-cables-top-mount\"\u003eHD cables for top-mount\u003c\/a\u003e: they come pre-set on a jig and fit with the original clips.\u003c\/p\u003e\n\u003cp\u003eIf you're still running the 020 rod-linkage gearbox, you want the \u003ca href=\"\/en\/products\/short-shifter-stainless-golf-mk2-mk3-jetta-vento-passat\"\u003eEpytec short shifter for the 020\u003c\/a\u003e. To get the shift feeling brand new again, the \u003ca href=\"\/en\/products\/brass-selector-slide-pad-gearbox-02a-02j-02m-02q-1j0711550\"\u003ebrass shift slider\u003c\/a\u003e and the \u003ca href=\"\/en\/products\/shift-cable-guide-bracket-1j0711789-swap-golf-mk1-mk2-mk3\"\u003e1J0711789 cable guide bracket\u003c\/a\u003e are two cheap parts that make a real difference.\u003c\/p\u003e\n\u003cp\u003eNot sure which gearbox you've got or which mount you need? We'll cover it in a \u003ca href=\"\/en\/products\/classic-vw-swap-project-consulting\"\u003econsultation\u003c\/a\u003e and tell you exactly which shifter and cables you need before you order.\u003c\/p\u003e","brand":"Coolerworx","offers":[{"title":"Inferior \/ 02A","offer_id":59877280678236,"sku":"CWX-V1-MK2-INF-02A","price":699.9,"currency_code":"EUR","in_stock":true},{"title":"Inferior \/ 02J","offer_id":59877280711004,"sku":"CWX-V1-MK2-INF-02J","price":699.9,"currency_code":"EUR","in_stock":true},{"title":"Inferior \/ 02M","offer_id":59877280743772,"sku":"CWX-V1-MK2-INF-02M","price":699.9,"currency_code":"EUR","in_stock":true},{"title":"Inferior \/ MQ250","offer_id":59877280776540,"sku":"CWX-V1-MK2-INF-MQ250","price":699.9,"currency_code":"EUR","in_stock":true},{"title":"Inferior \/ MQ350","offer_id":59877280809308,"sku":"CWX-V1-MK2-INF-MQ350","price":699.9,"currency_code":"EUR","in_stock":true},{"title":"Inferior \/ 02Q","offer_id":59877280842076,"sku":"CWX-V1-MK2-INF-02Q","price":699.9,"currency_code":"EUR","in_stock":true},{"title":"Superior \/ 02A","offer_id":59877280874844,"sku":"CWX-V1-MK2-SUP-02A","price":699.9,"currency_code":"EUR","in_stock":true},{"title":"Superior \/ 02J","offer_id":59877280907612,"sku":"CWX-V1-MK2-SUP-02J","price":699.9,"currency_code":"EUR","in_stock":true},{"title":"Superior \/ 02M","offer_id":59877280940380,"sku":"CWX-V1-MK2-SUP-02M","price":699.9,"currency_code":"EUR","in_stock":true},{"title":"Superior \/ MQ250","offer_id":59877280973148,"sku":"CWX-V1-MK2-SUP-MQ250","price":699.9,"currency_code":"EUR","in_stock":true},{"title":"Superior \/ MQ350","offer_id":59877281005916,"sku":"CWX-V1-MK2-SUP-MQ350","price":699.9,"currency_code":"EUR","in_stock":true},{"title":"Superior \/ 02Q","offer_id":59877281038684,"sku":"CWX-V1-MK2-SUP-02Q","price":699.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0883\/5265\/3660\/files\/AudiShortshifterPRO6_a93ecd15-aa63-48cc-9cae-890f448bba0f.jpg?v=1794509757"},{"product_id":"palanca-corta-coolerworx-v1-pro-corrado-02a-02j-02m","title":"Coolerworx V1 Pro short shifter for Corrado, 02A, 02J, 02M, MQ250, MQ350 and 02Q gearboxes","description":"\u003cp\u003eCoolerworx V1 Pro short shifter for the Corrado G60 and VR6 with a cable-shift gearbox. Pick the mount type and the gearbox you're running in the variants: 02A, 02J, 02M, MQ250, MQ350 or 02Q. Short throws, precise feel, zero play.\u003c\/p\u003e\n\u003cp\u003eBottom-mount fixes under the tunnel like the stock shifter and is the usual choice with a well-sorted 02A, 02J or 02M swap. Top-mount routes the cables inside the cabin, solving the cases where the gearbox comes from a newer car and the cables don't reach from below.\u003c\/p\u003e\n\u003cp\u003eMachined from aviation-grade 7075 aluminium with a 304 stainless steel base, CNC-machined and hand-assembled in Europe. This is the shifter Coolerworx develops and tests in competition, built to take a beating.\u003c\/p\u003e\n\u003cp\u003eWith the 02A gearbox you can fit it with your original cables. If your cables are off a Golf 3 or Corrado — the sloppiest ones — we'd recommend switching to the \u003ca href=\"\/en\/products\/motorsport-hd-shift-cables-bottom-mount-02a-02j-02m\"\u003eMotorsport HD cables for bottom-mount\u003c\/a\u003e or the \u003ca href=\"\/en\/products\/motorsport-hd-shift-cables-top-mount\"\u003eHD cables for top-mount\u003c\/a\u003e: they come pre-set on a jig and fit with the original clips.\u003c\/p\u003e\n\u003cp\u003eIf you're still running the 020 rod-linkage gearbox, you want the \u003ca href=\"\/en\/products\/short-shifter-stainless-golf-mk2-mk3-jetta-vento-passat\"\u003eEpytec short shifter for the 020\u003c\/a\u003e. To get the shift feeling brand new again, the \u003ca href=\"\/en\/products\/brass-selector-slide-pad-gearbox-02a-02j-02m-02q-1j0711550\"\u003ebrass shift slider\u003c\/a\u003e and the \u003ca href=\"\/en\/products\/shift-cable-guide-bracket-1j0711789-swap-golf-mk1-mk2-mk3\"\u003e1J0711789 cable guide bracket\u003c\/a\u003e are two cheap parts that make a real difference.\u003c\/p\u003e\n\u003cp\u003eNot sure which gearbox you've got or which mount you need? We'll cover it in a \u003ca href=\"\/en\/products\/classic-vw-swap-project-consulting\"\u003econsultation\u003c\/a\u003e and tell you exactly which shifter and cables you need before you order.\u003c\/p\u003e","brand":"Coolerworx","offers":[{"title":"Inferior \/ 02A","offer_id":59877369479516,"sku":"CWX-V1-COR-INF-02A","price":699.9,"currency_code":"EUR","in_stock":true},{"title":"Inferior \/ 02J","offer_id":59877369512284,"sku":"CWX-V1-COR-INF-02J","price":699.9,"currency_code":"EUR","in_stock":true},{"title":"Inferior \/ 02M","offer_id":59877369545052,"sku":"CWX-V1-COR-INF-02M","price":699.9,"currency_code":"EUR","in_stock":true},{"title":"Inferior \/ MQ250","offer_id":59877369577820,"sku":"CWX-V1-COR-INF-MQ250","price":699.9,"currency_code":"EUR","in_stock":true},{"title":"Inferior \/ MQ350","offer_id":59877369610588,"sku":"CWX-V1-COR-INF-MQ350","price":699.9,"currency_code":"EUR","in_stock":true},{"title":"Inferior \/ 02Q","offer_id":59877369643356,"sku":"CWX-V1-COR-INF-02Q","price":699.9,"currency_code":"EUR","in_stock":true},{"title":"Superior \/ 02A","offer_id":59877369676124,"sku":"CWX-V1-COR-SUP-02A","price":699.9,"currency_code":"EUR","in_stock":true},{"title":"Superior \/ 02J","offer_id":59877369708892,"sku":"CWX-V1-COR-SUP-02J","price":699.9,"currency_code":"EUR","in_stock":true},{"title":"Superior \/ 02M","offer_id":59877369741660,"sku":"CWX-V1-COR-SUP-02M","price":699.9,"currency_code":"EUR","in_stock":true},{"title":"Superior \/ MQ250","offer_id":59877369774428,"sku":"CWX-V1-COR-SUP-MQ250","price":699.9,"currency_code":"EUR","in_stock":true},{"title":"Superior \/ MQ350","offer_id":59877369807196,"sku":"CWX-V1-COR-SUP-MQ350","price":699.9,"currency_code":"EUR","in_stock":true},{"title":"Superior \/ 02Q","offer_id":59877369839964,"sku":"CWX-V1-COR-SUP-02Q","price":699.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0883\/5265\/3660\/files\/AudiShortshifterPRO6_e7a234f5-1e80-4c5e-a568-4c6f81e86a72.jpg?v=1794509868"},{"product_id":"cables-cambio-motorsport-hd-coolerworx-palancas-montaje-inferior-02a-02j-02m","title":"Coolerworx Motorsport HD shift cables for bottom-mount shifters, 02A, 02J, 02M, MQ250, MQ350 and 02Q gearboxes","description":"\u003cp\u003eAfter more than ten years fitting shifters on VWs, Coolerworx now makes its own shift cables. They're several times stronger than the originals, especially compared with the Golf 3 and Corrado ones, which is where we see the most play and missed-gear problems in swaps.\u003c\/p\u003e\n\u003cp\u003eSomething nobody else does: they're pre-set on their own jig in-house before shipping. You get them, fit them, secure them with the original clips and you're done — no spending an afternoon hunting for the sweet spot.\u003c\/p\u003e\n\u003cp\u003eStainless steel construction for street and competition use, heat shielding against manifold and exhaust heat, terminals included and compatible with the stock retaining clips.\u003c\/p\u003e\u003cp\u003eThis is the version for Coolerworx bottom-mount shifters. Pick the gearbox you're running in the variant. With the \u003ca href=\"\/en\/products\/coolerworx-v2-pro-bottom-mount-golf-mk2-jetta-mk2\"\u003eV2 Pro for the MK2\u003c\/a\u003e and the 02A gearbox they're mandatory; with every other combo they're the single biggest upgrade you can make to the shift feel. For top-mount shifters, there are the \u003ca href=\"\/en\/products\/motorsport-hd-shift-cables-top-mount\"\u003eHD cables for top-mount\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eIf you don't have the shifter yet, check out the \u003ca href=\"\/en\/products\/coolerworx-v1-pro-short-shifter-golf-mk1-jetta-scirocco-cable-gearbox\"\u003eV1 Pro for the MK1\u003c\/a\u003e, the \u003ca href=\"\/en\/products\/coolerworx-v1-pro-short-shifter-golf-mk2-jetta-mk2-02a-02j-02m\"\u003eV1 Pro for the MK2\u003c\/a\u003e or the \u003ca href=\"\/en\/products\/coolerworx-v1-pro-short-shifter-golf-mk3-jetta-vento-02a-02j-02m\"\u003eV1 Pro for the MK3\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eNot sure which gearbox you've got or which mount you need? We'll cover it in a \u003ca href=\"\/en\/products\/classic-vw-swap-project-consulting\"\u003econsultation\u003c\/a\u003e and tell you exactly which shifter and cables you need before you order.\u003c\/p\u003e","brand":"Coolerworx","offers":[{"title":"02A","offer_id":59877370265948,"sku":"CWX-CAB-INF-02A","price":299.9,"currency_code":"EUR","in_stock":true},{"title":"02J","offer_id":59877370298716,"sku":"CWX-CAB-INF-02J","price":299.9,"currency_code":"EUR","in_stock":true},{"title":"02M","offer_id":59877370331484,"sku":"CWX-CAB-INF-02M","price":299.9,"currency_code":"EUR","in_stock":true},{"title":"MQ250","offer_id":59877370364252,"sku":"CWX-CAB-INF-MQ250","price":299.9,"currency_code":"EUR","in_stock":true},{"title":"MQ350","offer_id":59877370397020,"sku":"CWX-CAB-INF-MQ350","price":299.9,"currency_code":"EUR","in_stock":true},{"title":"02Q","offer_id":59877370429788,"sku":"CWX-CAB-INF-02Q","price":299.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0883\/5265\/3660\/files\/coolerworx_motorsport_hd_cables_02a.jpg?v=1794509868"},{"product_id":"cables-cambio-motorsport-hd-coolerworx-palancas-montaje-superior","title":"Coolerworx Motorsport HD shift cables for top-mount shifters","description":"\u003cp\u003eAfter more than ten years fitting shifters on VWs, Coolerworx now makes its own shift cables. They're several times stronger than the originals, especially compared with the Golf 3 and Corrado ones, which is where we see the most play and missed-gear problems in swaps.\u003c\/p\u003e\n\u003cp\u003eSomething nobody else does: they're pre-set on their own jig in-house before shipping. You get them, fit them, secure them with the original clips and you're done — no spending an afternoon hunting for the sweet spot.\u003c\/p\u003e\n\u003cp\u003eStainless steel construction for street and competition use, heat shielding against manifold and exhaust heat, terminals included and compatible with the stock retaining clips.\u003c\/p\u003e\u003cp\u003eThis is the version for Coolerworx top-mount shifters, which route the cables inside the cabin. If your shifter is bottom-mount, you want the \u003ca href=\"\/en\/products\/motorsport-hd-shift-cables-bottom-mount-02a-02j-02m\"\u003eHD cables for bottom-mount\u003c\/a\u003e, with a variant per gearbox.\u003c\/p\u003e\n\u003cp\u003eThey fit the \u003ca href=\"\/en\/products\/coolerworx-v1-pro-short-shifter-golf-mk1-jetta-scirocco-cable-gearbox\"\u003eV1 Pro for the MK1\u003c\/a\u003e, the \u003ca href=\"\/en\/products\/coolerworx-v1-pro-short-shifter-golf-mk2-jetta-mk2-02a-02j-02m\"\u003eV1 Pro for the MK2\u003c\/a\u003e and the \u003ca href=\"\/en\/products\/coolerworx-v1-pro-short-shifter-golf-mk3-jetta-vento-02a-02j-02m\"\u003eV1 Pro for the MK3\u003c\/a\u003e in top-mount form.\u003c\/p\u003e\u003cp\u003eNot sure which gearbox you've got or which mount you need? We'll cover it in a \u003ca href=\"\/en\/products\/classic-vw-swap-project-consulting\"\u003econsultation\u003c\/a\u003e and tell you exactly which shifter and cables you need before you order.\u003c\/p\u003e","brand":"Coolerworx","offers":[{"title":"Default Title","offer_id":59877370462556,"sku":"CWX-CAB-SUP","price":299.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0883\/5265\/3660\/files\/coolerworx_motorsport_hd_cables_vw.jpg?v=1794509868"},{"product_id":"arbol-levas-049109101n-golf-mk1-gti-scirocco-jetta","title":"Genuine VW camshaft 049 109 101 N for Golf MK1 GTI 1.6 and 1.8, Scirocco and Jetta with mechanical lifters","description":"\u003cp\u003eGenuine camshaft 049 109 101 N for mechanical-lifter cylinder heads. This is the one from the first-generation GTIs: engine codes EG, DX, EV and GZ, in Golf MK1 and Cabrio, Jetta 1 and 2, Scirocco 1 and 2 and Passat 32\/32B.\u003c\/p\u003e\u003cp\u003eIf your cylinder head uses hydraulic lifters, this one won't fit — check your lifter type before ordering. With a new camshaft, the lifters should also be new, and lash is set with shims.\u003c\/p\u003e\u003cp\u003eIf you're rebuilding the top end, there's the \u003ca href=\"\/en\/products\/head-gasket-026103383p-golf-mk1-mk2-mk3-engine-827\"\u003egenuine head gasket\u003c\/a\u003e, and if you're doing the clutch at the same time, the \u003ca href=\"\/en\/products\/clutch-kit-027198141ax-golf-mk1-mk2-210mm\"\u003e210 mm GTI clutch kit\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eWant more from the 8V without picking the wrong camshaft? We'll cover it in a \u003ca href=\"\/en\/products\/classic-vw-swap-project-consulting\"\u003econsultation\u003c\/a\u003e.\u003c\/p\u003e","brand":"Volkswagen Classic Parts","offers":[{"title":"Default Title","offer_id":59882276651356,"sku":"049 109 101 N","price":203.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0883\/5265\/3660\/files\/D9E875D6E4F01610_001.jpg?v=1794523115"},{"product_id":"junta-culata-026103383p-golf-mk1-mk2-mk3-motores-827","title":"Genuine VW head gasket 026 103 383 P for 827-family 4-cylinder engines in Golf MK1, MK2, MK3, Jetta, Scirocco and Corrado","description":"\u003cp\u003eGenuine head gasket 026 103 383 P for many 4-cylinder engines in the 827 family: 1.6 and 1.8 8V (DX, EX, JH, RE, EW), 16V (KR, PL) and the MK3's 1.8 and 2.0 (2E, AAM, ABS, ADY, AEK, AEP, ACC). Fits Golf MK1, MK2 and MK3, Jetta, Scirocco 2, Corrado, Passat and Caddy.\u003c\/p\u003e\u003cp\u003eThat's a long list of engines, so check your engine code on the block before ordering. A genuine multi-layer gasket of the correct thickness is what keeps the stock compression; if the head's been skimmed, check whether you need a different one.\u003c\/p\u003e\u003cp\u003eIf the top end's already open, there's the \u003ca href=\"\/en\/products\/camshaft-049109101n-golf-mk1-gti-scirocco-jetta\"\u003eGTI camshaft 049 109 101 N\u003c\/a\u003e, and for the 16V the \u003ca href=\"\/en\/products\/timing-belt-027109119c-golf-mk2-16v-corrado-scirocco\"\u003etiming belt\u003c\/a\u003e with its \u003ca href=\"\/en\/products\/timing-belt-tensioner-roller-051109243-golf-mk2-16v-abf-corrado\"\u003etensioner roller\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eNot sure which gasket your engine needs? We'll cover it in a \u003ca href=\"\/en\/products\/classic-vw-swap-project-consulting\"\u003econsultation\u003c\/a\u003e.\u003c\/p\u003e","brand":"Volkswagen Classic Parts","offers":[{"title":"Default Title","offer_id":59882277044572,"sku":"026 103 383 P","price":70.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0883\/5265\/3660\/files\/D9E875D248470011_001.jpg?v=1794523115"},{"product_id":"kit-embrague-027198141ax-golf-mk1-mk2-210-mm","title":"Genuine VW clutch kit 027 198 141 AX, 210 mm, for Golf MK1 and MK2 GTI 8V, Jetta and Scirocco","description":"\u003cp\u003eGenuine clutch kit 027 198 141 AX, 210 mm, with pressure plate and disc, for the 1.6 and 1.8 8V: codes DX, KT, JH, EX, HN, RE, EW, 2H, and also PL and KR. Fits Golf MK1 and Cabrio, Golf MK2, Jetta 1 and 2 and Scirocco 2.\u003c\/p\u003e\u003cp\u003eThis is the GTI's stock clutch — smooth on the street and strong enough for a mildly tuned 8V without overdoing it. If you're putting through a lot more torque or doing a swap, you'd want a different setup.\u003c\/p\u003e\u003cp\u003eWhen you drop the gearbox, check the flywheel and cable condition too. Switching to an 02A gearbox on an MK1? There's the \u003ca href=\"\/en\/products\/mechanical-clutch-adapter-02a-golf-mk1-caddy-scirocco-g60-vr6-1-8t\"\u003emechanical clutch adapter\u003c\/a\u003e or the \u003ca href=\"\/en\/products\/full-hydraulic-clutch-conversion-kit-1-8t-swap-golf-mk1-cabrio-caddy\"\u003efull hydraulic clutch conversion kit\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eNot sure between a stock or uprated clutch for your engine? We'll cover it in a \u003ca href=\"\/en\/products\/classic-vw-swap-project-consulting\"\u003econsultation\u003c\/a\u003e.\u003c\/p\u003e","brand":"Volkswagen Classic Parts","offers":[{"title":"Default Title","offer_id":59882277175644,"sku":"027 198 141 AX","price":251.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0883\/5265\/3660\/files\/DA8751F290010A10_001.jpg?v=1794523117"},{"product_id":"correa-distribucion-027109119c-golf-mk2-16v-corrado-scirocco","title":"Genuine VW timing belt 027 109 119 C for Golf MK2 16V, Corrado, Scirocco and Passat (KR, PL and 9A)","description":"\u003cp\u003eGenuine timing belt 027 109 119 C, 25 x 1176 mm, for the 16V KR, PL and 9A. Fits Golf MK2 and Jetta 2 16V, Scirocco 2 16V, Corrado 16V and Passat 35i.\u003c\/p\u003e\u003cp\u003eOn a 16V the belt doesn't stretch before it snaps: change it by mileage or by age, whichever comes first, and if you don't know when it was last done, do it now. A failure here means the cylinder head.\u003c\/p\u003e\u003cp\u003eAlways do it together with its \u003ca href=\"\/en\/products\/timing-belt-tensioner-roller-051109243-golf-mk2-16v-abf-corrado\"\u003egenuine 051 109 243 tensioner roller\u003c\/a\u003e. If you're opening it up further, there's the \u003ca href=\"\/en\/products\/head-gasket-026103383p-golf-mk1-mk2-mk3-engine-827\"\u003ehead gasket\u003c\/a\u003e that fits KR and PL.\u003c\/p\u003e\u003cp\u003eFitting a 16V into an MK1, or want to check yours before you tighten it all up? We'll cover it in a \u003ca href=\"\/en\/products\/classic-vw-swap-project-consulting\"\u003econsultation\u003c\/a\u003e.\u003c\/p\u003e","brand":"Volkswagen Classic Parts","offers":[{"title":"Default Title","offer_id":59882277601628,"sku":"027 109 119 C","price":92.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0883\/5265\/3660\/files\/D9E875D2841BB011_001.jpg?v=1794523118"},{"product_id":"rodillo-tensor-distribucion-051109243-golf-mk2-16v-abf-corrado","title":"Genuine VW timing belt tensioner roller 051 109 243 for Golf MK2 16V, Golf MK3 ABF, Corrado and Scirocco","description":"\u003cp\u003eGenuine timing belt tensioner roller 051 109 243 for the 16V KR, PL and 9A and for the Golf MK3 GTI's 2.0 16V ABF. Fits Golf MK2 and MK3, Jetta 2, Scirocco 2, Corrado and Passat B3\/B4.\u003c\/p\u003e\u003cp\u003eA worn tensioner roller is what kills the belt: dry-bearing noise or a bit of side play means it's done. Always replace it together with the belt, never one without the other.\u003c\/p\u003e\u003cp\u003eThe matching belt for the KR, PL and 9A is the genuine \u003ca href=\"\/en\/products\/timing-belt-027109119c-golf-mk2-16v-corrado-scirocco\"\u003e027 109 119 C\u003c\/a\u003e. Fitting an ABF into an MK1? There's the \u003ca href=\"\/en\/products\/engine-mount-swap-g60-1-9-tdi-abf-golf-mk1-caddy-scirocco\"\u003eengine mount for the ABF swap\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e16V or ABF swap and not sure which timing kit to use? We'll cover it in a \u003ca href=\"\/en\/products\/classic-vw-swap-project-consulting\"\u003econsultation\u003c\/a\u003e.\u003c\/p\u003e","brand":"Volkswagen Classic Parts","offers":[{"title":"Default Title","offer_id":59882297098588,"sku":"051 109 243","price":62.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0883\/5265\/3660\/files\/D9E875D763154411_001.jpg?v=1794523189"},{"product_id":"tubo-aire-caliente-027129627e-golf-mk2-mk3-filtro-aire","title":"Genuine VW warm air intake tube 027 129 627 E from air filter, for Golf MK2, MK3, Jetta, Corrado and Passat","description":"\u003cp\u003eGenuine warm air intake tube 027 129 627 E, 50.8 mm diameter and 550 mm long, carrying pre-heated air from the manifold to the filter box. Fits a huge range of Golf MK2 and MK3, Jetta 2, Vento, Corrado, Passat, Caddy and Polo Classic versions.\u003c\/p\u003e\u003cp\u003eIt's a flexible aluminium tube that crumbles if you so much as look at it after years sitting next to the manifold. Without it, the engine takes longer to reach temperature in winter and the carburettor or injection doesn't run as it should.\u003c\/p\u003e\u003cp\u003eCheck the photos and your engine code to confirm the length, as there are several similar sizes.\u003c\/p\u003e\u003cp\u003eNot sure about your engine's intake? We'll cover it in a \u003ca href=\"\/en\/products\/classic-vw-swap-project-consulting\"\u003econsultation\u003c\/a\u003e.\u003c\/p\u003e","brand":"Volkswagen Classic Parts","offers":[{"title":"Default Title","offer_id":59882299228508,"sku":"027 129 627 E","price":50.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0883\/5265\/3660\/files\/DFEAD0542E88E611_001.jpg?v=1794523192"},{"product_id":"brida-corta-salida-reten-caja-02m-traccion-delantera-golf-mk1-mk2-mk3","title":"Short output stub with oil seal to run the 6-speed 02M gearbox in front-wheel drive (Golf MK1, MK2, MK3 and Corrado)","description":"\u003cp\u003eShort output stub with its oil seal to convert the 6-speed 02M gearbox, originally all-wheel drive, into a front-wheel-drive unit. Replaces the output to the rear axle and lets you fit the 02M into any front-wheel-drive VW with a VR6, 16V, 1.8T or G60.\u003c\/p\u003e\n\u003cp\u003eThe 02M takes far more torque than an 02A or 02J and has a great set of ratios. To finish the conversion you'll need gearbox mounts and adapted axles, and we'd recommend the \u003ca href=\"\/en\/products\/steel-reinforcement-plate-02m-02q-6-speed-gearbox\"\u003esteel reinforcement plate for the 02M\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eWant to know if the 02M fits your project and what else you need? We'll explain it in a \u003ca href=\"\/en\/products\/classic-vw-swap-project-consulting\"\u003econsultation\u003c\/a\u003e.\u003c\/p\u003e","brand":"Epytec","offers":[{"title":"Default Title","offer_id":59882323312988,"sku":"EPY-941","price":463.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0883\/5265\/3660\/files\/kurzer-antriebswellenflansch-dichtring-6-gang-02m-getriebe-allrad-umbau-2wd-front-antrieb-vr6-r32-golf-1-2-3-4-turbo-941.webp?v=1794523340"},{"product_id":"soporte-motor-aluminio-g60-golf-mk2-corrado-passat","title":"Aluminium engine mount for G60 in Golf MK2, Corrado and Passat","description":"\u003cp\u003eSolid aluminium engine mount, originally from competition use, for all G60s. Replaces the original hydraulic mount on the chassis rail, putting an end to wear and the engine rocking back under acceleration. Also works if you're fitting a G60 into another model.\u003c\/p\u003e\u003cp\u003eIt transmits more vibration than the original, so it's intended for cars used hard. To finish the rest of the mounts on an MK2 there's the \u003ca href=\"\/en\/products\/front-engine-mount-4-cylinder-02a-02j-golf-mk2-passat-corrado\"\u003efront engine mount for 4-cylinder engines\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eNot sure it's worth it for a daily driver? We'll talk it through in a \u003ca href=\"\/en\/products\/classic-vw-swap-project-consulting\"\u003econsultation\u003c\/a\u003e.\u003c\/p\u003e","brand":"Epytec","offers":[{"title":"Default Title","offer_id":59882323378524,"sku":"EPY-303","price":87.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0883\/5265\/3660\/files\/vw-golf-corrado-passat-g60-aluminium-motorlager-hydrolager-umbau-303.jpg?v=1794523341"},{"product_id":"soportes-motor-caja-swap-vr6-r32-dsg-dq250-golf-mk2-mk3-corrado-passat","title":"Engine and gearbox mounts for VR6, V6 or R32 swap with DSG DQ250 gearbox in Golf MK2, MK3, Corrado, Passat, Jetta and Vento","description":"\u003cp\u003eEngine and gearbox mounts for fitting the DSG DQ250 with a 6-cylinder engine (Golf 3 or 4 VR6, V6 or R32) into a Golf MK2 or MK3, Corrado, Passat, Jetta or Vento. Since every car has its own tolerances at the front mounting point, these are supplied as loose parts so you can get a perfect fit on your car.\u003c\/p\u003e\u003cp\u003eThis is a mount for someone with welding experience or a trusted shop. For the gearbox side there's also the DQ250 gearbox mount. And if the engine is a VR6 with an 02M, the \u003ca href=\"\/en\/products\/gearbox-mount-02m-swap-vr6-r32-golf-mk2-mk3-corrado-passat\"\u003e02M gearbox mount for VR6 and R32\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eA DSG with a VR6 in an MK2 or MK3 is a big project. We'll plan it with you in a \u003ca href=\"\/en\/products\/classic-vw-swap-project-consulting\"\u003econsultation\u003c\/a\u003e.\u003c\/p\u003e","brand":"Epytec","offers":[{"title":"Default Title","offer_id":59882330128732,"sku":"EPY-1221","price":81.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0883\/5265\/3660\/files\/motorhalter-getriebehalter-golf-2-golf-3-passat-corrado-6-zylinder-motor-v6-vr6-r32-umbau-dsg-dq250-getriebe-1221.jpg?v=1794523443"},{"product_id":"kit-soportes-motor-caja-swap-vr6-r32-golf-4-caja-02m-golf-mk2-mk3","title":"Engine and gearbox mount kit for Golf 4 VR6 or R32 swap with 02M gearbox in Golf MK2, MK3, Corrado, Passat, Jetta and Vento","description":"\u003cp\u003eSet of engine and gearbox mounts for fitting the Golf 4 VR6 (24V) or the R32 with the 6-speed 02M gearbox into a Golf MK2 or MK3, Corrado, Passat, Jetta or Vento. Bolts to the original mounting points, so the gearbox sits correctly aligned and fitting is clean, with no welding on the car.\u003c\/p\u003e\u003cp\u003eWith the 02M in front-wheel drive you'll need the short output flange and adapted axles. To reinforce the setup, the \u003ca href=\"\/en\/products\/steel-vr6-engine-cradle-reinforced-golf-passat-corrado-vento\"\u003esteel VR6 engine cradle\u003c\/a\u003e and the \u003ca href=\"\/en\/products\/steel-reinforcement-plate-02m-02q-6-speed-gearbox\"\u003e02M reinforcement plate\u003c\/a\u003e are well worth having.\u003c\/p\u003e\u003cp\u003eWant to match the R32 or VR6 24V with everything it needs around it? We'll cover it in a \u003ca href=\"\/en\/products\/classic-vw-swap-project-consulting\"\u003econsultation\u003c\/a\u003e.\u003c\/p\u003e","brand":"Epytec","offers":[{"title":"Default Title","offer_id":59882330325340,"sku":"EPY-889","price":327.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0883\/5265\/3660\/files\/motor--getriebehalter-golf-2-3-passat-corrado-jetta-vento-02m-getriebe-golf-4-vr6-r32-motor-umbau-halter-889.jpg?v=1794523444"},{"product_id":"soporte-motor-reforzado-conversion-4motion-02m-02q-golf-mk2-mk3-corrado","title":"Reinforced engine mount for 4Motion conversion with 02M or 02Q gearbox in Golf MK2, MK3, Corrado, Passat, Jetta and Vento","description":"\u003cp\u003eReinforced engine mount, essential for converting a Golf MK2 or MK3, Corrado, Passat, Jetta or Vento with a 4-cylinder engine (1.8T, 16V or TDI) and 02M or 02Q gearbox to 4Motion. The original aluminium mount is too bulky and sits too low, ending up rubbing against the axle head and the drivetrain.\u003c\/p\u003e\u003cp\u003eIt's one of the first parts that comes up on any all-wheel-drive conversion list. For the gearbox there's the \u003ca href=\"\/en\/products\/gearbox-mount-02m-6-speed-golf-mk2-mk3-corrado-passat-jetta-vento\"\u003e02M gearbox mount with starter motor support\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eA 4Motion build on an MK2 has a lot of parts to match up. We'll plan it out in a \u003ca href=\"\/en\/products\/classic-vw-swap-project-consulting\"\u003econsultation\u003c\/a\u003e.\u003c\/p\u003e","brand":"Epytec","offers":[{"title":"Default Title","offer_id":59882330358108,"sku":"EPY-934","price":158.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0883\/5265\/3660\/files\/motorhalter-golf-2-3-corrado-umbau-4-motion-18t-16v-tdi-motorhalter-allrad-02m-02q-getriebe-934.jpg?v=1794523445"}],"url":"https:\/\/vwheelswap.com\/en\/collections\/golf-mk2-engine-gearbox-swap.oembed","provider":"vwheelswap","version":"1.0","type":"link"}