{"title":"Brakes for Golf MK3","description":"\u003cp\u003eBig brake kits, 5x112 bolt pattern conversions, G60 and 16V conversions, calipers, discs and adapters for Golf MK3, Vento and Corrado.\u003c\/p\u003e","products":[{"product_id":"reguladores-de-presion-de-frenada-3-15-vw-golf-mk1-discos-traseros-g60-16v-vr6-2-uds","title":"3\/15 Brake Pressure Regulators VW Golf MK1 — G60 \/ 16V \/ VR6 Rear Discs (2 pcs.)","description":"\u003cp\u003eIf you're converting your Golf MK1, Mk2 or Mk3 from rear drum brakes to G60, 16V or VR6 rear disc brakes, these 3\/15 pressure regulators let you properly match the brake bias to the new system.\u003c\/p\u003e\u003ch2\u003eWhy 3\/15 instead of the original 3\/35?\u003c\/h2\u003e\u003cp\u003eThe stock 3\/35 regulator is calibrated for the Golf MK1's rear drum brakes. Once you switch to discs, that calibration no longer suits the new setup.\u003c\/p\u003e\u003cp\u003eThe 3\/15 limits the hydraulic pressure reaching the rear axle and stops the rear wheels from locking up too early under hard braking. The brake bias is matched to the rear disc conversion, keeping the behaviour stable and predictable.\u003c\/p\u003e\u003ch2\u003eDirect fit\u003c\/h2\u003e\u003cp\u003eThe 3\/15 regulators are a direct replacement for the original regulators and are compatible with the stock brake lines.\u003c\/p\u003e\u003cp\u003eThey install between the master cylinder and the brake lines using the two adapters included in the kit, with no need to modify the original hoses or make any special adaptations.\u003c\/p\u003e\u003ch2\u003eKit contents\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e2 x 3\/15 brake pressure regulators\u003c\/li\u003e\n\u003cli\u003e2 x adapters for connecting to the master cylinder\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eImportant after fitting\u003c\/h2\u003e\u003cp\u003eOnce installed, it's essential to check that the braking system works correctly and that the bias between both axles suits your vehicle's specific setup before driving normally.\u003c\/p\u003e\u003cp\u003eSystem behaviour can vary depending on the master cylinder, the type of front and rear brakes, ABS and the other components used in the conversion.\u003c\/p\u003e\u003cp\u003eIf you're unsure which setup you need for your Golf MK1, get in touch. We can advise you based on the brake combination you're fitting on your project.\u003c\/p\u003e\u003ch2\u003eComplete your disc brake conversion\u003c\/h2\u003e\u003cp\u003eFor a properly sized braking system, the regulators need to be combined with the right master cylinder and conversion kit. We have several options to complete your build:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e22.2mm master cylinder, with or without ABS\u003c\/li\u003e\n\u003cli\u003e25.4mm master cylinder, depending on the setup\u003c\/li\u003e\n\u003cli\u003eRear disc brake conversion kits in \u003ca href=\"\/en\/products\/230mm-rear-disc-brake-kit-compact-bearing-4x100-golf-mk1-mk2-mk3\"\u003e4x100\u003c\/a\u003e, \u003ca href=\"\/en\/products\/230mm-rear-disc-brake-kit-compact-bearing-5x100-no-abs-golf-mk1-mk2-mk3\"\u003e5x100\u003c\/a\u003e and \u003ca href=\"\/en\/products\/256mm-rear-disc-brake-kit-compact-bearing-5x112-golf-mk1-mk2-mk3\"\u003e5x112\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIf you're doing a brake conversion on a Golf MK1, we can help you choose the right combination of master cylinder, regulators and rear brakes for your project.\u003c\/p\u003e\u003cp\u003eOn an MK1, also remember the \u003ca href=\"\/en\/products\/2-handbrake-cables-golf-mk1-rear-disc-conversion-16v-g60\"\u003ehandbrake cables\u003c\/a\u003e for the conversion. Not sure which combination you need? We can go over it in \u003ca href=\"\/en\/products\/classic-vw-swap-project-consulting\"\u003ea consulting session\u003c\/a\u003e.\u003c\/p\u003e","brand":"Special Parts","offers":[{"title":"Default Title","offer_id":58785868513628,"sku":"VWS-PT-63932","price":120.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0883\/5265\/3660\/files\/111.001.008SP_d.jpg?v=1787601759"},{"product_id":"bomba-de-freno-25-4-mm-sin-abs-para-conversiones-de-freno-golf-mk1-mk2-mk3-corrado","title":"25.4mm Brake Master Cylinder, No ABS, for Golf MK1, MK2, MK3 and Corrado","description":"\u003cp\u003e25.4mm master cylinder for Golf MK1, MK2, MK3 and Corrado without ABS, built for cars running bigger brakes than stock.\u003c\/p\u003e\u003cp\u003eWhen you fit VR6, S3, Porsche or four-piston calipers, the original master cylinder can't move enough fluid, and the pedal goes to the floor before the calipers really bite. The 25.4mm makes up for that extra volume and gives you back a firm, short pedal. Fits GTI, G60 and VR6 without ABS, and equivalent conversions.\u003c\/p\u003e\u003cp\u003eChoose the right bore size. For a standard G60 conversion, the \u003ca href=\"\/en\/products\/22-2mm-brake-master-cylinder-g60-conversion-golf-mk1-mk2-mk3-passat\"\u003e22.2mm master cylinder\u003c\/a\u003e is usually enough, and this 25.4mm one is for bigger setups. On an MK1, pair it with the \u003ca href=\"\/en\/products\/9-inch-brake-booster-adjustable-rod-golf-mk1-cabrio-caddy-jetta-scirocco\"\u003e9\" brake booster with adjustable rod\u003c\/a\u003e. Not sure? \u003ca href=\"\/en\/products\/classic-vw-swap-project-consulting\"\u003eWe'll help you choose in a consulting session\u003c\/a\u003e.\u003c\/p\u003e","brand":"Special Parts","offers":[{"title":"Default Title","offer_id":59864597856604,"sku":"111.001.001SP","price":69.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0883\/5265\/3660\/files\/111.001.001SP.jpg?v=1794487465"},{"product_id":"bomba-de-freno-22-2-mm-sin-abs-para-conversion-a-frenos-g60-golf-mk1-mk2-mk3-passat","title":"22.2mm Brake Master Cylinder, No ABS, for G60 Brake Conversion on Golf MK1, MK2, MK3 and Passat","description":"\u003cp\u003e22.2mm master cylinder without ABS, the right size for a G60 brake conversion on Golf MK1, MK2, MK3 and Passat.\u003c\/p\u003e\u003cp\u003eG60 calipers move more fluid than the stock ones, and if you keep the original master cylinder the pedal gets long and loses feel. With the 22.2mm, the system is balanced and the pedal responds the way it should.\u003c\/p\u003e\u003cp\u003eFitting something bigger than a G60, like a 288mm or 312mm VR6 setup, an S3 or a Porsche? What you need is the \u003ca href=\"\/en\/products\/25-4mm-brake-master-cylinder-no-abs-golf-mk1-mk2-mk3-corrado\"\u003e25.4mm master cylinder\u003c\/a\u003e. On an MK1, it's worth pairing it with the \u003ca href=\"\/en\/products\/9-inch-brake-booster-adjustable-rod-golf-mk1-cabrio-caddy-jetta-scirocco\"\u003e9\" brake booster with adjustable rod\u003c\/a\u003e, and if you still don't have the calipers, check out the \u003ca href=\"\/en\/products\/front-brake-conversion-kit-g60-golf-1-cabriolet-280mm\"\u003eG60 brake conversion kit\u003c\/a\u003e.\u003c\/p\u003e","brand":"Special Parts","offers":[{"title":"Default Title","offer_id":59864598479196,"sku":"111.001.002SP","price":48.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0883\/5265\/3660\/files\/111.001.002SP.jpg?v=1794487477"},{"product_id":"latiguillos-freno-metalicos-57-cm-conversion-pinzas-grandes-golf-mk1-mk2-mk3","title":"57cm metal brake lines for big caliper conversion on Golf MK1, MK2 and MK3","description":"\u003cp\u003ePair of 57cm braided stainless steel brake lines, with a 90-degree M10x1 male fitting and a straight M10x1 female fitting. Built for big caliper conversions — Brembo, Porsche or TTRS-style — on Golf 1, 2 and 3, Passat, Corrado, Jetta, Polo and Toledo.\u003c\/p\u003e\u003cp\u003eUnlike rubber lines, they don't expand under hard braking, so the pedal feels firmer and they last longer. Supplied with material certificate.\u003c\/p\u003e\u003cp\u003ePairs with the \u003ca href=\"\/en\/products\/porsche-996-caliper-adapters-312x25-disc-golf-mk3-corrado-passat-vr6\"\u003ePorsche 996 4-piston caliper adapters for 312x25 discs\u003c\/a\u003e. And on the MK1, with the \u003ca href=\"\/en\/products\/g60-brake-caliper-adapter-golf-mk1-caddy-scirocco-jetta-1\"\u003eG60 caliper adapter for MK1\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eNot sure it fits your project? We'll sort it out in a \u003ca href=\"\/en\/products\/classic-vw-swap-project-consulting\"\u003econsulting session\u003c\/a\u003e and save you from buying parts you won't use.\u003c\/p\u003e","brand":"Epytec","offers":[{"title":"Default Title","offer_id":59871685673308,"sku":"EPY-SF110","price":109.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0883\/5265\/3660\/files\/stahlflex-bremsleitung-vw-golf-1-2-3-g60-passat-scirocco-polo-corrado-jetta-brembo-porsche-ttrs-bremsen-umbau-SF110.jpg?v=1794498992"},{"product_id":"adaptadores-pinza-trasera-disco-256x22-pinza-r32-s3-golf-mk2-mk3-corrado","title":"Rear caliper adapters for 256x22 disc and R32\/S3 caliper on Golf MK2, MK3, Corrado, Passat and Jetta","description":"\u003cp\u003eTo fit the 256x22 vented rear disc (8L0615601) with the R32 or S3 caliper (8N0615423C and 424C) on Golf 2 and 3 (VR6 included), Corrado, Jetta, Passat 35i, Scirocco, Vento, Polo 6N1 and 9N, Cordoba, Ibiza and Toledo. On the Golf 1, only if you've already converted to 5x100.\u003c\/p\u003e\u003cp\u003eIncludes both adapters, two spacers and material certificate. You'll also need the caliper bracket 8N0615425B, the steering knuckles 6Q0501117 and 118, and the Polo 9N hub (FAG 713610490). The handbrake cable has to be run to the new caliper.\u003c\/p\u003e\u003cp\u003eIf you'd rather keep the G60 or VR6 caliper, start with the \u003ca href=\"\/en\/products\/rear-caliper-brackets-357615125c-golf-mk1-mk2-mk3-corrado-jetta-passat\"\u003erear caliper brackets 357615125C\u003c\/a\u003e. And while you're at it, fit \u003ca href=\"\/en\/products\/metal-brake-lines-57cm-big-caliper-conversion-golf-mk1-mk2-mk3\"\u003e57cm metal brake lines\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eIf this is your first swap and you don't know where to start, in the \u003ca href=\"\/en\/products\/classic-vw-swap-project-consulting\"\u003eswap consulting session\u003c\/a\u003e we'll put together the full parts list for you.\u003c\/p\u003e","brand":"Epytec","offers":[{"title":"Default Title","offer_id":59871686590812,"sku":"EPY-398-PL","price":97.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0883\/5265\/3660\/files\/vw-golf-1-2-3-corrado-r32-s3-bremssattel-adapter-bremse-hinten-bremssattaladapter-g60-vr6-256x22-398-PL.jpg?v=1794498992"},{"product_id":"discos-freno-zimmermann-sport-312x25-perforados-5x100","title":"Zimmermann Sport 312x25 drilled brake discs, 5x100, for Golf MK1 and MK3 VR6 conversions (pair)","description":"\u003cp\u003ePair of Zimmermann Sport 100.1240.52 front discs, 312x25, drilled, 5x100 bolt pattern, 65mm center bore and 34.4mm hub height. It's the stock size on the Golf 4 GTI, Audi S3 and TT (8N0615301A), and the one called for by the 312 adapters for the Golf 1 and Golf 3 VR6.\u003c\/p\u003e\u003cp\u003eABE type-approved, no paperwork.\u003c\/p\u003e\u003cp\u003eOn the MK1 they fit with the \u003ca href=\"\/en\/products\/caliper-adapters-312x25-disc-golf-5-gti-caliper-golf-mk1-caddy\"\u003e312mm caliper adapters\u003c\/a\u003e. On the Golf 3 and Corrado with the \u003ca href=\"\/en\/products\/porsche-996-caliper-adapters-312x25-disc-golf-mk3-corrado-passat-vr6\"\u003ePorsche 996 4-piston caliper adapters for 312x25 discs\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eNot sure it fits your project? We'll sort it out in a \u003ca href=\"\/en\/products\/classic-vw-swap-project-consulting\"\u003econsulting session\u003c\/a\u003e and save you from buying parts you won't use.\u003c\/p\u003e","brand":"Zimmermann","offers":[{"title":"Default Title","offer_id":59871708086620,"sku":"EPY-ZIM102","price":235.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0883\/5265\/3660\/files\/2x-vw-golf-bora-audi-tt-a3-gti-s3-v6-bremsscheibe-zimmermann-sport-312x25-skoda-seat-ibiza-quattro-100124052-ZIM102.jpg?v=1794499045"},{"product_id":"portapinzas-traseros-357615125c-golf-mk1-mk2-mk3-corrado-jetta-passat","title":"Rear caliper brackets 357615125C for rear disc brakes on Golf MK1, MK2, MK3, Corrado, Jetta and Passat (pair)","description":"\u003cp\u003ePair of rear caliper brackets, part number 357615125C (1H0615405C), for the Corrado, Golf 1, 2 and 3, Jetta and Passat 35i with G60 or VR6 rear discs. They're the base for drum-to-disc rear conversions and for a lot of big-caliper adapters.\u003c\/p\u003e\u003cp\u003eIf yours are pitted or the threads are worn, it's better to fit new ones than fight with them.\u003c\/p\u003e\u003cp\u003eIf you want the full conversion, check the \u003ca href=\"\/en\/products\/230mm-rear-disc-brake-kit-compact-bearing-4x100-golf-mk1-mk2-mk3\"\u003erear disc brake conversion kit\u003c\/a\u003e. And with rear discs, don't forget the \u003ca href=\"\/en\/products\/3-15-brake-pressure-regulators-golf-mk1-rear-disc-g60-16v-vr6\"\u003e3\/15 brake pressure regulators\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eIf this is your first swap and you don't know where to start, in the \u003ca href=\"\/en\/products\/classic-vw-swap-project-consulting\"\u003eswap consulting session\u003c\/a\u003e we'll put together the full parts list for you.\u003c\/p\u003e","brand":"Epytec","offers":[{"title":"Default Title","offer_id":59871727386972,"sku":"EPY-APA174","price":65.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0883\/5265\/3660\/files\/bremssatteltrger-vw-corrado-golf-1-2-3-jetta-passat-35-i-vr6-g60-hinterachse-bremsen-umbau-tuning-APA174.jpg?v=1794499083"},{"product_id":"adaptadores-pinza-porsche-996-disco-312x25-golf-mk3-corrado-passat-vr6","title":"Porsche 996 4-piston caliper adapters for 312x25 disc, Golf MK3, Corrado and Passat with VR6 Plus axle","description":"\u003cp\u003eFront adapters to fit the Porsche 996 4-piston caliper (996.351.421 and 422) onto the 312x25 disc from the S3 and Golf 4 (8N0615301A) on the Golf 3, Passat 35i and Corrado with the Plus axle (VR6, 2.0 16V and GTI) and on the Toledo.\u003c\/p\u003e\u003cp\u003eOnly works with those Porsche calipers. Check your wheel: on some, the caliper rubs and you'll need spacers. Includes two adapters, high-strength hardware and certificate; calipers and discs sold separately.\u003c\/p\u003e\u003cp\u003eThe discs you need are the \u003ca href=\"\/en\/products\/zimmermann-sport-312x25-drilled-discs-5x100\"\u003eZimmermann Sport 312x25 drilled discs, 5x100\u003c\/a\u003e. And with this caliper, fit \u003ca href=\"\/en\/products\/metal-brake-lines-57cm-big-caliper-conversion-golf-mk1-mk2-mk3\"\u003e57cm metal brake lines\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eIf this is your first swap and you don't know where to start, in the \u003ca href=\"\/en\/products\/classic-vw-swap-project-consulting\"\u003eswap consulting session\u003c\/a\u003e we'll put together the full parts list for you.\u003c\/p\u003e","brand":"Epytec","offers":[{"title":"Default Title","offer_id":59871728009564,"sku":"EPY-1095","price":212.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0883\/5265\/3660\/files\/vw-golf-3-corrado-vr6-bremssatteladapter-golf-4-v6-audi-s3-bremse-312x25mm-4-kolben-996-porsche-bremssattel-1095.jpg?v=1794499084"},{"product_id":"kit-conversion-frenos-g60-280-4x100-golf-mk2-mk3-corrado","title":"Full G60 280mm brake conversion kit, 4x100 bolt pattern, for Golf MK2, MK3 and Corrado","description":"\u003cp\u003eEverything you need to fit G60 brakes with a 280mm disc on the front of a Golf 2, Golf 3 and Corrado while staying on 4x100 wheels. No re-drilling discs and no track widening — the best alternative to spacers when changing bolt pattern.\u003c\/p\u003e\u003cp\u003eDirect fit.\u003c\/p\u003e\u003cp\u003eIf you're only missing calipers, caliper brackets and pads, there's the \u003ca href=\"\/en\/products\/g60-front-calipers-brackets-pads-golf-mk2-mk3-corrado\"\u003eG60 caliper, bracket and pad set\u003c\/a\u003e. And to match the pedal feel, the \u003ca href=\"\/en\/products\/22-2mm-brake-master-cylinder-g60-conversion-golf-mk1-mk2-mk3-passat\"\u003e22.2mm brake master cylinder\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eNot sure it fits your project? We'll sort it out in a \u003ca href=\"\/en\/products\/classic-vw-swap-project-consulting\"\u003econsulting session\u003c\/a\u003e and save you from buying parts you won't use.\u003c\/p\u003e","brand":"Epytec","offers":[{"title":"Default Title","offer_id":59874644263260,"sku":"EPY-APA320","price":458.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0883\/5265\/3660\/files\/vw-golf-2-3-corrado-bremsen-umbausatz-g60-4x100-vorderachse-280mm-bremsscheibe-09672875-APA320.jpg?v=1794503383"},{"product_id":"pinzas-portapinzas-pastillas-g60-delanteras-golf-mk2-mk3-corrado","title":"G60 front calipers, caliper brackets and pads for conversion on Golf MK2, MK3 and Corrado","description":"\u003cp\u003eNew set for the front axle in a G60 brake conversion: left and right caliper (443 615 123A and 124A), both caliper brackets, and four pads (357 698 151). For Golf 2 and 3, Corrado and many of our adapters.\u003c\/p\u003e\u003cp\u003e280mm discs sold separately.\u003c\/p\u003e\u003cp\u003eIf you also want discs and hub carriers, check the \u003ca href=\"\/en\/products\/g60-brake-conversion-kit-280-4x100-golf-mk2-mk3-corrado\"\u003eG60 brake kit, 4x100, for MK2 and MK3\u003c\/a\u003e. The discs you need are the \u003ca href=\"\/en\/products\/zimmermann-sport-280x22-drilled-discs-4x100-golf-g60-corrado\"\u003eZimmermann Sport 280x22 drilled discs, 4x100\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eIf this is your first swap and you don't know where to start, in the \u003ca href=\"\/en\/products\/classic-vw-swap-project-consulting\"\u003eswap consulting session\u003c\/a\u003e we'll put together the full parts list for you.\u003c\/p\u003e","brand":"Epytec","offers":[{"title":"Default Title","offer_id":59874644296028,"sku":"EPY-APA175","price":242.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0883\/5265\/3660\/files\/bremssattel-bremssattelhalter-bremsbelge-vw-golf-corrado-g60-umbau-vorderachse-APA175.jpg?v=1794503384"},{"product_id":"portapinzas-delanteros-g60-357615125c-golf-mk2-mk3-corrado","title":"Front G60 caliper brackets 357 615 125 C for Golf MK2, MK3 and Corrado (pair)","description":"\u003cp\u003ePair of new front G60 caliper brackets, part number 357 615 125 C, for the Golf, Corrado and conversions. Work with the G60 caliper and with a lot of our adapters.\u003c\/p\u003e\u003cp\u003eIf yours have worn threads, it's better to fit new ones.\u003c\/p\u003e\u003cp\u003eWith calipers and pads, there's the \u003ca href=\"\/en\/products\/g60-front-calipers-brackets-pads-golf-mk2-mk3-corrado\"\u003eG60 caliper, bracket and pad set\u003c\/a\u003e. On the MK1 the \u003ca href=\"\/en\/products\/g60-brake-caliper-adapter-golf-mk1-caddy-scirocco-jetta-1\"\u003eG60 caliper adapter for MK1\u003c\/a\u003e is used.\u003c\/p\u003e\u003cp\u003eNot sure which combination suits your engine and gearbox? We'll go through it in a \u003ca href=\"\/en\/products\/classic-vw-swap-project-consulting\"\u003eswap consulting session\u003c\/a\u003e before you buy anything.\u003c\/p\u003e","brand":"Epytec","offers":[{"title":"Default Title","offer_id":59874644754780,"sku":"EPY-APA173","price":126.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0883\/5265\/3660\/files\/bremssatteltrger-vw-golf-corrado-g60-vorderachse-bremsen-umbau-tuning-APA173.jpg?v=1794503385"},{"product_id":"pinza-freno-delantera-izquierda-g60-golf-mk2-mk3-corrado","title":"Front left G60 brake caliper (Girling 54 \/ ATE) for Golf MK2, MK3 and Corrado","description":"\u003cp\u003eNew front left G60 brake caliper (443 615 123A, 857 615 123), Girling 54. For Golf 2 and 3, Corrado and G60 brake conversions with our adapters.\u003c\/p\u003e\u003cp\u003eSold individually.\u003c\/p\u003e\u003cp\u003eThe right one is the \u003ca href=\"\/en\/products\/front-right-g60-caliper-golf-mk2-mk3-corrado\"\u003eright G60 caliper\u003c\/a\u003e. For the full set, there's the \u003ca href=\"\/en\/products\/g60-front-calipers-brackets-pads-golf-mk2-mk3-corrado\"\u003eG60 caliper, bracket and pad set\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eNot sure it fits your project? We'll sort it out in a \u003ca href=\"\/en\/products\/classic-vw-swap-project-consulting\"\u003econsulting session\u003c\/a\u003e and save you from buying parts you won't use.\u003c\/p\u003e","brand":"Epytec","offers":[{"title":"Default Title","offer_id":59874644787548,"sku":"EPY-APA176","price":78.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0883\/5265\/3660\/files\/bremssattel-vw-golf-2-3-corrado-g60-umbau-lucas-girling-54-ate-vorderachse-links-APA176.jpg?v=1794503386"},{"product_id":"pinza-freno-delantera-derecha-g60-golf-mk2-mk3-corrado","title":"Front right G60 brake caliper (Girling 54 \/ ATE) for Golf MK2, MK3 and Corrado","description":"\u003cp\u003eNew front right G60 brake caliper (443 615 124A, 857 615 124), Girling 54. For Golf 2 and 3, Corrado and G60 brake conversions.\u003c\/p\u003e\u003cp\u003eSold individually.\u003c\/p\u003e\u003cp\u003eThe left one is the \u003ca href=\"\/en\/products\/front-left-g60-caliper-golf-mk2-mk3-corrado\"\u003eleft G60 caliper\u003c\/a\u003e. For the full set, there's the \u003ca href=\"\/en\/products\/g60-front-calipers-brackets-pads-golf-mk2-mk3-corrado\"\u003eG60 caliper, bracket and pad set\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eIf this is your first swap and you don't know where to start, in the \u003ca href=\"\/en\/products\/classic-vw-swap-project-consulting\"\u003eswap consulting session\u003c\/a\u003e we'll put together the full parts list for you.\u003c\/p\u003e","brand":"Epytec","offers":[{"title":"Default Title","offer_id":59874644918620,"sku":"EPY-APA177","price":78.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0883\/5265\/3660\/files\/bremssattel-vw-golf-corrado-g60-umbau-lucas-girling-54-ate-vorderachse-rechts-APA177.jpg?v=1794503386"},{"product_id":"adaptadores-pinza-porsche-996-disco-312x25-golf-mk2-mk3-corrado","title":"Porsche 996 caliper adapters for 312x25 disc, Golf MK2, MK3, Corrado, Passat and Jetta with narrow axle","description":"\u003cp\u003eAdapters to fit the 4-piston Porsche 996 caliper onto the 312x25 disc from the S3 and Golf 4 GTI on Golf 2 and 3, Passat, Corrado, Jetta, Polo and Toledo with the narrow axle. A very serious braking setup with easy-to-find replacement parts.\u003c\/p\u003e\u003cp\u003eDirect fit, no welding or machining the stock parts, with material certificate.\u003c\/p\u003e\u003cp\u003eIf you're on 4x100, the discs are the \u003ca href=\"\/en\/products\/brake-discs-312x25-4x100-golf-mk2-mk3\"\u003e312 discs in 4x100\u003c\/a\u003e. For the VR6 Plus axle, there are the \u003ca href=\"\/en\/products\/porsche-996-caliper-adapters-312x25-disc-golf-mk3-corrado-passat-vr6\"\u003ePorsche 996 caliper adapters for the Plus axle\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eNot sure which combination suits your engine and gearbox? We'll go through it in a \u003ca href=\"\/en\/products\/classic-vw-swap-project-consulting\"\u003eswap consulting session\u003c\/a\u003e before you buy anything.\u003c\/p\u003e","brand":"Epytec","offers":[{"title":"Default Title","offer_id":59874644951388,"sku":"EPY-975","price":200.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0883\/5265\/3660\/files\/vw-golf-corrado-passat-2-3-g60-312x25-s3-bremse-bremssattel-996-porsche-adapter-975.jpg?v=1794503387"},{"product_id":"discos-freno-312x25-anclaje-4x100-golf-mk2-mk3","title":"312x25 brake discs, 4x100 bolt pattern, for Golf MK2 and MK3 (pair)","description":"\u003cp\u003ePair of 312x25 front discs, identical to the S3's 8N0 615 301 but with a 4x100 bolt pattern. If you want 312mm brakes and want to stay on 4x100 wheels, this saves you re-drilling.\u003c\/p\u003e\u003cp\u003eWorks with a lot of our caliper adapters and 4x100 hub carriers.\u003c\/p\u003e\u003cp\u003eFit with the \u003ca href=\"\/en\/products\/porsche-996-caliper-adapters-312x25-disc-golf-mk2-mk3-corrado\"\u003ePorsche 996 adapters for the narrow axle\u003c\/a\u003e. In 5x100, there are the \u003ca href=\"\/en\/products\/zimmermann-sport-312x25-drilled-discs-5x100\"\u003eZimmermann Sport 312x25 drilled discs, 5x100\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eNot sure which combination suits your engine and gearbox? We'll go through it in a \u003ca href=\"\/en\/products\/classic-vw-swap-project-consulting\"\u003eswap consulting session\u003c\/a\u003e before you buy anything.\u003c\/p\u003e","brand":"Epytec","offers":[{"title":"Default Title","offer_id":59874696593756,"sku":"EPY-APA305","price":202.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0883\/5265\/3660\/files\/2x-bremsscheiben-vw-golf-2-golf-3-312x25mm-audi-s3-bremsscheibe-lochkreisumbau-4x100-vorderachse-8n0-615-301-APA305.jpg?v=1794503440"},{"product_id":"discos-freno-280x22-golf-3-vr6-anclaje-5x112-eje-plus","title":"280x22 brake discs from Golf 3 VR6, 5x112 bolt pattern, for Plus axle (pair)","description":"\u003cp\u003eOriginal Golf 3, Corrado and Vento VR6 discs, 280x22 (1H0 615 301 A), with a 5x112 bolt pattern, for cars with the Plus axle converted to 5x112. No re-drilling.\u003c\/p\u003e\u003cp\u003eCompatible with a lot of our adapters and 5x112 hub carriers.\u003c\/p\u003e\u003cp\u003eThe hub carriers you need are the \u003ca href=\"\/en\/products\/front-hub-carriers-5x112-plus-axle-vr6-golf-mk2-mk3-corrado\"\u003e5x112 hub carriers for the Plus axle\u003c\/a\u003e. If you're doing front and rear, check the \u003ca href=\"\/en\/products\/5x100-to-5x112-conversion-kit-discs-288-226-golf-mk3-vr6\"\u003e5x112 front and rear kit\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eIf this is your first swap and you don't know where to start, in the \u003ca href=\"\/en\/products\/classic-vw-swap-project-consulting\"\u003eswap consulting session\u003c\/a\u003e we'll put together the full parts list for you.\u003c\/p\u003e","brand":"Epytec","offers":[{"title":"Default Title","offer_id":59874697150812,"sku":"EPY-APA244","price":59.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0883\/5265\/3660\/files\/2xbremsscheiben-vw-golf-3-vr6-280x22mm-lochkreisumbau-5x112-plusachse-vorderachs-APA244.jpg?v=1794503441"},{"product_id":"latiguillos-freno-traseros-metalicos-golf-mk2-mk3-jetta-corrado","title":"M12x1 metal rear brake lines for brake conversion on Golf MK2, MK3, Jetta and Corrado","description":"\u003cp\u003eBraided stainless steel rear brake lines, longer than stock, with M12x1 fitting, for bigger brake conversions on Golf 2 and 3, Jetta, Corrado, Scirocco and Polo 9N.\u003c\/p\u003e\u003cp\u003eUnlike rubber ones, they don't expand, the pedal feels firmer, and they come with material certificate.\u003c\/p\u003e\u003cp\u003eFor the front, the \u003ca href=\"\/en\/products\/metal-brake-lines-57cm-big-caliper-conversion-golf-mk1-mk2-mk3\"\u003efront metal brake lines\u003c\/a\u003e. They pair with the \u003ca href=\"\/en\/products\/rear-caliper-adapters-256x22-disc-r32-s3-caliper-golf-mk2-mk3-corrado\"\u003e256 R32\/S3 rear adapters\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eNot sure which combination suits your engine and gearbox? We'll go through it in a \u003ca href=\"\/en\/products\/classic-vw-swap-project-consulting\"\u003eswap consulting session\u003c\/a\u003e before you buy anything.\u003c\/p\u003e","brand":"Epytec","offers":[{"title":"Default Title","offer_id":59874698363228,"sku":"EPY-SF116","price":112.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0883\/5265\/3660\/files\/stahlflex-bremsleitung-hinterachse-vw-golf-2-3-jetta-corrado-caddy-bremsen-umbau-SF116.jpg?v=1794503441"},{"product_id":"cable-freno-mano-1h0609721a-golf-mk3-vento-corrado","title":"Handbrake cable 1H0 609 721A for Golf MK3, Vento and Corrado","description":"\u003cp\u003eNew handbrake cable for Golf 3, Vento and Corrado (1H0 609 721A, 535 609 721A), 1604mm, for rear disc brakes. Also works in a lot of brake conversions.\u003c\/p\u003e\u003cp\u003eSold individually.\u003c\/p\u003e\u003cp\u003eOn the MK1 with rear discs, check the \u003ca href=\"\/en\/products\/2-handbrake-cables-golf-mk1-rear-disc-conversion-16v-g60\"\u003ehandbrake cables for the MK1\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eNot sure it fits your project? We'll sort it out in a \u003ca href=\"\/en\/products\/classic-vw-swap-project-consulting\"\u003econsulting session\u003c\/a\u003e and save you from buying parts you won't use.\u003c\/p\u003e","brand":"Epytec","offers":[{"title":"Default Title","offer_id":59874714386780,"sku":"EPY-APA184","price":19.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0883\/5265\/3660\/files\/vw-golf-3-vento-corrado-seilzug-feststellbremse-handbremsseil-bremsanlage-umbau-APA184.jpg?v=1794503495"},{"product_id":"kit-de-freno-de-disco-trasero-de-230-mm-con-rodamiento-compacto-y-anclaje-4x100-para-golf-mk1-mk2-y-mk3","title":"230mm Rear Disc Brake Kit with Compact Bearing and 4x100 Bolt Pattern for Golf MK1, MK2 and MK3","description":"\u003cp\u003eComplete kit for converting the rear axle from drum to 230mm disc on Golf MK1, MK2 and MK3, also Jetta and Polo 6N, keeping the stock 4x100 bolt pattern. What makes this kit stand out is that it replaces the old-school tapered roller bearings — which sit inside the drum or disc and need adjusting — with a compact bearing in the hub that gives you no trouble.\u003c\/p\u003e\u003cp\u003eIncludes two 230mm discs, two rear knuckles, two calipers with their caliper brackets, two bearings and mounting hardware. No spacers or adapters needed, so your 4x100 wheels fit exactly as before.\u003c\/p\u003e\u003cp\u003eTo finish the conversion you'll need rear brake lines and the right handbrake cable; for MK1 there are the \u003ca href=\"\/en\/products\/2-handbrake-cables-golf-mk1-rear-disc-conversion-16v-g60\"\u003ehandbrake cables for rear disc conversion\u003c\/a\u003e, and for MK3 the \u003ca href=\"\/en\/products\/handbrake-cable-1h0609721a-golf-mk3-vento-corrado\"\u003e1H0 609 721A cable\u003c\/a\u003e. If you'd rather have the classic kit with bearings in the disc, there's the \u003ca href=\"\/en\/products\/kit-de-conversion-de-frenos-de-disco-eje-trasero-vw-golf-1-2-3-freno-de-disco-4-x-100\"\u003e4x100 rear disc kit\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eNot sure whether to go 230 or 256mm, or which master cylinder you'll need afterward? We'll cover it in a \u003ca href=\"\/en\/products\/classic-vw-swap-project-consulting\"\u003eswap and project consultation\u003c\/a\u003e.\u003c\/p\u003e","brand":"Special Parts","offers":[{"title":"Default Title","offer_id":59882356932956,"sku":"111.047.002SP","price":508.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0883\/5265\/3660\/files\/111.047.002SP.jpg?v=1794523640"},{"product_id":"kit-de-freno-de-disco-trasero-de-230-mm-con-discos-brembo-rodamiento-compacto-y-anclaje-4x100-para-golf-mk1-mk2-y-mk3","title":"230mm Rear Disc Brake Kit with Brembo Discs, Compact Bearing and 4x100 Bolt Pattern for Golf MK1, MK2 and MK3","description":"\u003cp\u003eThe Brembo-disc version of the 230mm rear disc kit for Golf MK1, MK2, MK3, Jetta and Polo 6N. You go from rear drums to discs while keeping the 4x100 bolt pattern, and at the same time swap the original tapered roller bearings for a compact bearing in the hub that lasts longer and needs no adjusting.\u003c\/p\u003e\u003cp\u003eIncludes two 230mm Brembo discs, the rear knuckle repair kit, the caliper and caliper bracket set, and two bearings. No adapters or spacers: your stock wheels still fit the same way.\u003c\/p\u003e\u003cp\u003eIt's a good starting point if you're fitting 16V or G60 brakes up front and want the car to brake evenly. You'll still need the rear brake line and handbrake cable; for MK1 there are the \u003ca href=\"\/en\/products\/2-handbrake-cables-golf-mk1-rear-disc-conversion-16v-g60\"\u003ehandbrake cables for rear disc conversion\u003c\/a\u003e. With more braking up front you'll usually need to size up the master cylinder, for example to the \u003ca href=\"\/en\/products\/22-2mm-brake-master-cylinder-g60-conversion-golf-mk1-mk2-mk3-passat\"\u003e22.2mm master cylinder\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eNot sure what you need? We'll work through it together in a \u003ca href=\"\/en\/products\/classic-vw-swap-project-consulting\"\u003eswap and project consultation\u003c\/a\u003e.\u003c\/p\u003e","brand":"Special Parts","offers":[{"title":"Default Title","offer_id":59882356965724,"sku":"111.047.020SP","price":488.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0883\/5265\/3660\/files\/111.047.020SP.jpg?v=1794523641"},{"product_id":"kit-de-freno-de-disco-trasero-de-230-mm-con-rodamiento-compacto-y-anclaje-5x100-sin-abs-para-golf-mk1-mk2-y-mk3","title":"230mm Rear Disc Brake Kit with Compact Bearing and 5x100 Bolt Pattern (No ABS) for Golf MK1, MK2 and MK3","description":"\u003cp\u003eThis kit converts the rear axle to 230mm discs and the 5x100 bolt pattern in one step. It fits Golf MK1, MK2 and MK3, Jetta and Polo 6N without ABS, and it's the clean way to run 5x100 wheels without resorting to dual-drilled spacers.\u003c\/p\u003e\u003cp\u003eIt fits a compact bearing in the hub instead of the original tapered roller bearings, so there's no fiddling with bearing play and it lasts a lot longer. Comes with 230mm discs, rear knuckles, calipers with caliper brackets, bearings and hardware.\u003c\/p\u003e\u003cp\u003eUp front you'll also need 5x100 hubs: on MK1 the \u003ca href=\"\/en\/products\/front-hub-carriers-5x100-golf-mk1-caddy-scirocco\"\u003efront 5x100 hubs for Golf MK1\u003c\/a\u003e, and on MK2 and MK3 the \u003ca href=\"\/en\/products\/front-hub-carriers-5x100-abs-golf-mk2-mk3-jetta-2\"\u003e5x100 hubs for Golf MK2 and MK3\u003c\/a\u003e. If your car has ABS, there's an ABS version of this same kit; and if you're after the version with bearings in the disc, there's the \u003ca href=\"\/en\/products\/kit-de-conversion-de-frenos-de-disco-eje-trasero-vw-golf-1-2-3-freno-de-disco-5-x-100\"\u003e5x100 rear disc kit\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eChanging bolt pattern has its tricky bits; if you want to get it right the first time, we'll cover it in a \u003ca href=\"\/en\/products\/classic-vw-swap-project-consulting\"\u003econsultation\u003c\/a\u003e.\u003c\/p\u003e","brand":"Special Parts","offers":[{"title":"Default Title","offer_id":59882356998492,"sku":"111.047.003SP","price":508.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0883\/5265\/3660\/files\/111.047.003SP.jpg?v=1794523641"},{"product_id":"kit-de-freno-de-disco-trasero-de-256-mm-con-rodamiento-compacto-y-anclaje-4x100-para-golf-mk1-mk2-y-mk3","title":"256mm Rear Disc Brake Kit with Compact Bearing and 4x100 Bolt Pattern for Golf MK1, MK2 and MK3","description":"\u003cp\u003e256mm rear disc kit for Golf MK1, MK2, MK3, Jetta and Polo 6N that keeps the 4x100 bolt pattern. It's the next step up from the 230mm kit: more disc out back to match a big front brake setup, like 280mm or 312mm G60, without throwing off the car's balance under hard braking.\u003c\/p\u003e\u003cp\u003eSwaps the stock tapered roller bearings for a compact bearing in the hub, and comes with everything you need for the axle: 256mm discs, rear knuckles, calipers, caliper brackets, bearings and hardware. No adapters or spacers needed.\u003c\/p\u003e\u003cp\u003eWith 256mm discs out back it's normal to pair it with a \u003ca href=\"\/en\/products\/25-4mm-brake-master-cylinder-no-abs-golf-mk1-mk2-mk3-corrado\"\u003e25.4mm master cylinder\u003c\/a\u003e and, on MK1, the \u003ca href=\"\/en\/products\/9-inch-brake-booster-adjustable-rod-golf-mk1-cabrio-caddy-jetta-scirocco\"\u003e9\" brake booster with adjustable rod\u003c\/a\u003e. For the handbrake on MK1 there are the \u003ca href=\"\/en\/products\/2-handbrake-cables-golf-mk1-rear-disc-conversion-16v-g60\"\u003ehandbrake cables for rear disc conversion\u003c\/a\u003e. If you'd rather have a Brembo finish, there's also a Brembo version of this kit.\u003c\/p\u003e\u003cp\u003eNot sure about brake balance? We'll cover it in a \u003ca href=\"\/en\/products\/classic-vw-swap-project-consulting\"\u003eswap and project consultation\u003c\/a\u003e.\u003c\/p\u003e","brand":"Special Parts","offers":[{"title":"Default Title","offer_id":59882357424476,"sku":"111.047.004SP","price":508.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0883\/5265\/3660\/files\/111.047.004SP.jpg?v=1794523642"},{"product_id":"kit-de-freno-de-disco-trasero-de-256-mm-con-discos-brembo-rodamiento-compacto-y-anclaje-4x100-para-golf-mk1-mk2-y-mk3","title":"256mm Rear Disc Brake Kit with Brembo Discs, Compact Bearing and 4x100 Bolt Pattern for Golf MK1, MK2 and MK3","description":"\u003cp\u003e256mm rear disc with Brembo discs for Golf MK1, MK2, MK3, Jetta and Polo 6N, without touching the 4x100 bolt pattern. It's the kit to go for when the car already runs a serious setup up front and you want the rear to match it instead of staying on drums or a small disc.\u003c\/p\u003e\u003cp\u003eComes complete: two Brembo discs, pads, two calipers with their caliper brackets, two rear knuckles and two compact bearings with the hardware. The compact bearing replaces the stock tapered ones, so no more adjusting bearing play every time you service the brakes. No adapters or spacers.\u003c\/p\u003e\u003cp\u003eIf you're after the same with a different bolt pattern, there are versions in 5x100 and 5x112. With 256mm out back it's normal to fit a \u003ca href=\"\/en\/products\/25-4mm-brake-master-cylinder-no-abs-golf-mk1-mk2-mk3-corrado\"\u003e25.4mm master cylinder\u003c\/a\u003e and, on MK1, a \u003ca href=\"\/en\/products\/9-inch-brake-booster-adjustable-rod-golf-mk1-cabrio-caddy-jetta-scirocco\"\u003e9\" brake booster\u003c\/a\u003e. On MK1 don't forget the \u003ca href=\"\/en\/products\/2-handbrake-cables-golf-mk1-rear-disc-conversion-16v-g60\"\u003ehandbrake cables for rear disc conversion\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eThe kit includes a material certificate, useful for legalizing the brake conversion at the MOT\/ITV. If you want to get the whole brake system right, we'll help in a \u003ca href=\"\/en\/products\/classic-vw-swap-project-consulting\"\u003econsultation\u003c\/a\u003e.\u003c\/p\u003e","brand":"Special Parts","offers":[{"title":"Default Title","offer_id":59882380362076,"sku":"111.047.019SP","price":549.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0883\/5265\/3660\/files\/111.047.019SP.jpg?v=1794523737"},{"product_id":"kit-de-freno-de-disco-trasero-de-256-mm-con-rodamiento-compacto-y-anclaje-5x100-para-golf-mk1-mk2-y-mk3","title":"256mm Rear Disc Brake Kit with Compact Bearing and 5x100 Bolt Pattern for Golf MK1, MK2 and MK3","description":"\u003cp\u003e256mm rear disc and a switch to the 5x100 bolt pattern in the same kit, for Golf MK1, MK2, MK3, Jetta and Polo 6N. It's the way to run 5x100 wheels out back with no spacers or adapters, while also having a rear brake that matches a G60 or a 312mm front setup.\u003c\/p\u003e\u003cp\u003eIncludes two discs, pads, two calipers with caliper brackets, two rear knuckles, two hubs with compact bearing, adapter bushings and hardware. Comes with a material certificate for legalizing the conversion.\u003c\/p\u003e\u003cp\u003eTo finish the bolt pattern change up front there are the \u003ca href=\"\/en\/products\/front-hub-carriers-5x100-golf-mk1-caddy-scirocco\"\u003efront 5x100 hubs for MK1\u003c\/a\u003e or the \u003ca href=\"\/en\/products\/front-hub-carriers-5x100-abs-golf-mk2-mk3-jetta-2\"\u003e5x100 hubs for MK2 and MK3\u003c\/a\u003e, and if you're moving to a 280 disc up front, the \u003ca href=\"\/en\/products\/discos-freno-g60-280x22-anclaje-5x100-golf-mk1-mk2\"\u003e280x22 G60 discs in 5x100\u003c\/a\u003e. If you'd rather have bearings in the disc, there's the classic \u003ca href=\"\/en\/products\/kit-de-conversion-de-frenos-de-disco-eje-trasero-vw-golf-1-2-3-freno-de-disco-5-x-100\"\u003e5x100 rear disc kit\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eAny doubts about the bolt pattern change, we'll sort them out in a \u003ca href=\"\/en\/products\/classic-vw-swap-project-consulting\"\u003eswap and project consultation\u003c\/a\u003e.\u003c\/p\u003e","brand":"Special Parts","offers":[{"title":"Default Title","offer_id":59882380394844,"sku":"111.047.014SP","price":559.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0883\/5265\/3660\/files\/111.047.014SP.jpg?v=1794523738"},{"product_id":"kit-de-freno-de-disco-trasero-de-256-mm-con-rodamiento-compacto-y-anclaje-5x112-para-golf-mk1-mk2-y-mk3","title":"256mm Rear Disc Brake Kit with Compact Bearing and 5x112 Bolt Pattern for Golf MK1, MK2 and MK3","description":"\u003cp\u003eFor those moving to 5x112 wheels on a Golf MK1, MK2 or MK3 (also Jetta and Polo 6N): 256mm rear disc and 5x112 bolt pattern sorted in one go, no dual-drilled spacers or odd adapters.\u003c\/p\u003e\u003cp\u003eThe kit comes with two discs, pads, two calipers with their caliper brackets, two rear knuckles, two hubs with compact bearing, adapter bushings and hardware, plus the material certificate for the conversion. The compact bearing replaces the original tapered ones and needs no adjusting.\u003c\/p\u003e\u003cp\u003eUp front you'll need 5x112 hubs: \u003ca href=\"\/en\/products\/front-hub-carriers-5x112-golf-mk1-caddy-scirocco\"\u003e5x112 hubs for Golf MK1\u003c\/a\u003e, \u003ca href=\"\/en\/products\/front-hub-carriers-5x112-abs-golf-mk2-mk3-jetta-2\"\u003e5x112 hubs for MK2 and MK3\u003c\/a\u003e, or, on the VR6 Plus axle, the \u003ca href=\"\/en\/products\/front-hub-carriers-5x112-plus-axle-vr6-golf-mk2-mk3-corrado\"\u003e5x112 hubs for the Plus axle\u003c\/a\u003e. If you just want the bolt pattern change with the classic bearing option, there's the \u003ca href=\"\/en\/products\/rear-axle-5x112-conversion-kit-golf-mk1-mk2-mk3-passat-scirocco\"\u003e5x112 rear disc kit\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eRunning Audi or Golf 4 wheels on a classic and not sure where to start? We'll cover it in a \u003ca href=\"\/en\/products\/classic-vw-swap-project-consulting\"\u003econsultation\u003c\/a\u003e.\u003c\/p\u003e","brand":"Special Parts","offers":[{"title":"Default Title","offer_id":59882380427612,"sku":"111.047.015SP","price":610.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0883\/5265\/3660\/files\/111.047.015SP.jpg?v=1794523739"},{"product_id":"kit-de-freno-de-disco-trasero-de-230-mm-con-rodamiento-compacto-abs-y-anclaje-5x100-para-golf-mk1-mk2-y-mk3","title":"230mm Rear Disc Brake Kit with Compact Bearing, ABS and 5x100 Bolt Pattern for Golf MK1, MK2 and MK3","description":"\u003cp\u003eABS version of the 230mm rear disc kit with 5x100 bolt pattern for Golf MK1, MK2, MK3, Jetta and Polo 6N. Built for cars that already run ABS or will get it as part of the conversion, without giving up the switch to 5x100.\u003c\/p\u003e\u003cp\u003eIncludes two solid 230mm discs, pads, two Lucas calipers with caliper brackets, two rear knuckles, two hubs with compact bearing and the adapter bushings. No spacers or adapters needed.\u003c\/p\u003e\u003cp\u003eIf your car doesn't have ABS, there's a non-ABS version of the same kit. For the front axle in 5x100 there are the \u003ca href=\"\/en\/products\/front-hub-carriers-5x100-abs-golf-mk2-mk3-jetta-2\"\u003e5x100 hubs with ABS ring for Golf MK2 and MK3\u003c\/a\u003e and, on MK1, the \u003ca href=\"\/en\/products\/front-hub-carriers-5x100-golf-mk1-caddy-scirocco\"\u003efront 5x100 hubs\u003c\/a\u003e. For the handbrake on MK3, the \u003ca href=\"\/en\/products\/handbrake-cable-1h0609721a-golf-mk3-vento-corrado\"\u003e1H0 609 721A cable\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eFitting ABS to a classic and want to do it right? We'll plan it out in a \u003ca href=\"\/en\/products\/classic-vw-swap-project-consulting\"\u003eswap and project consultation\u003c\/a\u003e.\u003c\/p\u003e","brand":"Special Parts","offers":[{"title":"Default Title","offer_id":59882380460380,"sku":"111.047.016SP","price":559.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0883\/5265\/3660\/files\/111.047.016SP.jpg?v=1794523740"},{"product_id":"discos-de-freno-traseros-de-280-mm-con-anclaje-4x100-para-conversion-en-golf-mk1-mk2-y-mk3-pareja","title":"280mm Rear Brake Discs with 4x100 Bolt Pattern for Conversion on Golf MK1, MK2 and MK3 (Pair)","description":"\u003cp\u003ePair of 280mm rear discs with 4x100 bolt pattern for fitting a big rear brake on Golf MK1, MK2 and MK3. These are the discs used in 280mm rear axle conversions, when the front already runs a tight 312 or G60 setup and the rear needs to match it.\u003c\/p\u003e\u003cp\u003eThey fit with the 280mm conversion caliper brackets, which we also sell separately. If you don't have the rear axle ready yet, the simplest option is the complete 280mm rear brake kit in 4x100, which already includes discs, calipers, caliper brackets, knuckles and bearings. If you're going 5x100, the same pair exists with that bolt pattern.\u003c\/p\u003e\u003cp\u003eNot sure if your axle can take this size with your wheels? We'll cover it in a \u003ca href=\"\/en\/products\/classic-vw-swap-project-consulting\"\u003eswap and project consultation\u003c\/a\u003e.\u003c\/p\u003e","brand":"Special Parts","offers":[{"title":"Default Title","offer_id":59882389602652,"sku":"111.015.021SP","price":152.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0883\/5265\/3660\/files\/111.015.021SP.jpg?v=1794523816"},{"product_id":"discos-de-freno-traseros-de-280-mm-con-anclaje-5x100-para-conversion-en-golf-mk1-mk2-y-mk3-pareja","title":"280mm Rear Brake Discs with 5x100 Bolt Pattern for Conversion on Golf MK1, MK2 and MK3 (Pair)","description":"\u003cp\u003ePair of solid 280mm rear discs with 5x100 bolt pattern for Golf MK1, MK2 and MK3. These are fitted to the rear axle when doing the big-brake conversion and switching to 5x100 wheels at the same time.\u003c\/p\u003e\u003cp\u003eThey need the 280mm conversion caliper brackets and 5x100 rear hubs. If you're starting from scratch, the 280mm rear brake kit with hubs and 5x100 bolt pattern already includes everything. For 4x100 there's the same pair with that bolt pattern, and up front, if you're after matching discs, the \u003ca href=\"\/en\/products\/discos-freno-g60-280x22-anclaje-5x100-golf-mk1-mk2\"\u003e280x22 G60 discs in 5x100\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eWant to make sure everything fits before buying? We'll cover it in a \u003ca href=\"\/en\/products\/classic-vw-swap-project-consulting\"\u003econsultation\u003c\/a\u003e.\u003c\/p\u003e","brand":"Special Parts","offers":[{"title":"Default Title","offer_id":59882389668188,"sku":"111.015.020SP","price":152.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0883\/5265\/3660\/files\/111.015.020SP.jpg?v=1794523816"},{"product_id":"portapinzas-traseros-de-conversion-para-disco-de-280-mm-en-golf-mk1-mk2-y-mk3-pareja","title":"Rear Conversion Caliper Brackets for 280mm Disc on Golf MK1, MK2 and MK3 (Pair)","description":"\u003cp\u003ePair of rear caliper brackets for fitting a 280mm disc on the rear axle of Golf MK1, MK2 and MK3. They're the part that positions the caliper at the right radius when you move from a 226 or 230mm rear brake to a big one.\u003c\/p\u003e\u003cp\u003eThey pair with the 280mm rear discs, in 4x100 or 5x100, and with whichever rear caliper your conversion uses. If you just need one part or want a spare, this set is what you're looking for; if you're starting from scratch, the complete 280mm rear brake kit already includes them along with discs, calipers, knuckles and bearings.\u003c\/p\u003e\u003cp\u003eNot sure which rear caliper to use with these brackets? We'll clarify it in a \u003ca href=\"\/en\/products\/classic-vw-swap-project-consulting\"\u003eswap and project consultation\u003c\/a\u003e.\u003c\/p\u003e","brand":"Special Parts","offers":[{"title":"Default Title","offer_id":59882389799260,"sku":"111.004.041SP","price":132.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0883\/5265\/3660\/files\/111.004.041SP.jpg?v=1794523817"},{"product_id":"portapinzas-traseros-de-conversion-para-disco-de-256-mm-en-golf-mk1-mk2-mk3-y-polo-6n-pareja","title":"Rear Conversion Caliper Brackets for 256mm Disc on Golf MK1, MK2, MK3 and Polo 6N (Pair)","description":"\u003cp\u003ePair of rear caliper brackets (reference BDA510) for fitting a 256mm disc on the rear axle of Golf MK1, MK2, MK3 and Polo 6N. With them you step up the rear brake from the stock 226 or 230mm to 256mm, which is the size that best balances a G60 or 312mm front setup.\u003c\/p\u003e\u003cp\u003eComes with mounting hardware. If you just need one part or want a spare, this is the set; if you're building the axle from scratch, the 256mm rear disc kit with compact bearing already includes them with discs, calipers, knuckles and bearings, in 4x100, 5x100 or 5x112.\u003c\/p\u003e\u003cp\u003eFor the rear brake lines on this conversion there are the brake line sets for 256mm brakes. And if you want us to get the whole system right, we'll cover it in a \u003ca href=\"\/en\/products\/classic-vw-swap-project-consulting\"\u003econsultation\u003c\/a\u003e.\u003c\/p\u003e","brand":"Special Parts","offers":[{"title":"Default Title","offer_id":59882389832028,"sku":"111.004.012SP","price":141.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0883\/5265\/3660\/files\/111.004.012SP.jpg?v=1794523818"},{"product_id":"latiguillos-de-freno-traseros-de-205-mm-para-conversion-a-disco-de-256-mm-en-golf-mk1-mk2-mk3-y-polo-6n-pareja","title":"205mm Rear Brake Lines for 256mm Disc Conversion on Golf MK1, MK2, MK3 and Polo 6N (Pair)","description":"\u003cp\u003ePair of 205mm rear brake lines, with banjo bolt, for the 256mm disc conversion on Golf MK1, MK2, MK3 and Polo 6N. The length is designed so the caliper works tension-free through the full range of rear suspension travel.\u003c\/p\u003e\u003cp\u003eThis is an AP24 house-brand part, built to original-equipment quality. We also have the MAPCO version for the same application. If you're building the axle from scratch, the 256mm rear disc kits with compact bearing and the 256mm caliper brackets complete the conversion.\u003c\/p\u003e\u003cp\u003eFitting brakes and not sure what else you need? We'll put together the list in a \u003ca href=\"\/en\/products\/classic-vw-swap-project-consulting\"\u003econsultation\u003c\/a\u003e.\u003c\/p\u003e","brand":"Special Parts","offers":[{"title":"Default Title","offer_id":59882389963100,"sku":"AP3750\/2","price":24.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0883\/5265\/3660\/files\/AP3750_2.jpg?v=1794523820"},{"product_id":"latiguillos-de-freno-mapco-para-conversion-a-disco-de-256-mm-en-golf-mk1-mk2-mk3-y-polo-6n-pareja","title":"MAPCO Brake Lines for 256mm Disc Conversion on Golf MK1, MK2, MK3 and Polo 6N (Pair)","description":"\u003cp\u003ePair of MAPCO brake lines for 256mm disc conversions on Golf MK1, MK2, MK3 and Polo 6N. They're the correct length for the 256mm caliper, with no pulling or rubbing against the suspension.\u003c\/p\u003e\u003cp\u003eIf you're after a cheaper option for the same application, there are the 205mm AP24 brake lines. To finish the conversion there are the 256mm caliper brackets and the 256mm rear disc kits with compact bearing.\u003c\/p\u003e\u003cp\u003eNot sure about sizing? We'll clarify it in a \u003ca href=\"\/en\/products\/classic-vw-swap-project-consulting\"\u003econsultation\u003c\/a\u003e.\u003c\/p\u003e","brand":"MAPCO","offers":[{"title":"Default Title","offer_id":59882389995868,"sku":"3663\/1","price":36.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0883\/5265\/3660\/files\/3663_1.jpg?v=1794523821"},{"product_id":"kit-frenos-g60-vr6-delantero-trasero-anclaje-5x100-abs-golf-mk2-mk3-jetta-2","title":"G60 or VR6 Front and Rear Brake Kit with 5x100 Bolt Pattern and ABS for Golf MK2, MK3 and Jetta 2","description":"\u003cp\u003eComplete kit for converting a Golf MK2, MK3 or Jetta 2 to G60 or VR6 brakes on both axles and, at the same time, to the 5x100 bolt pattern, ABS-compatible. It's the best alternative to adapter spacers, since you don't widen the track and the wheel runs at its real offset.\u003c\/p\u003e\u003cp\u003eTo match the pedal feel, the \u003ca href=\"\/en\/products\/25-4mm-brake-master-cylinder-no-abs-golf-mk1-mk2-mk3-corrado\"\u003e25.4mm master cylinder\u003c\/a\u003e (non-ABS cars) and the \u003ca href=\"\/en\/products\/9-inch-brake-booster-golf-mk2-corrado-passat\"\u003e9\" brake booster\u003c\/a\u003e are the logical add-ons. Out back there are also the \u003ca href=\"\/en\/products\/rear-caliper-brackets-357615125c-golf-mk1-mk2-mk3-corrado-jetta-passat\"\u003e357615125C rear caliper brackets\u003c\/a\u003e if you only need one part.\u003c\/p\u003e\u003cp\u003eWant to make sure the kit fits your wheels and your ABS? We'll cover it in a \u003ca href=\"\/en\/products\/classic-vw-swap-project-consulting\"\u003econsultation\u003c\/a\u003e.\u003c\/p\u003e","brand":"Epytec","offers":[{"title":"Default Title","offer_id":59882390421852,"sku":"EPY-APA206","price":385.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0883\/5265\/3660\/files\/vw-golf-2-3-jetta-2-bremsensatz-radnabe-vorderachse-hinterachse-umbausatz-5x100-g60-vr6-bremse-abs-APA206.jpg?v=1794523821"},{"product_id":"kit-frenos-delanteros-16v-discos-ventilados-256-pinzas-portapinzas-golf-mk2-mk3","title":"16V Front Brake Kit with 256mm Vented Discs, Calipers and Caliper Brackets for Golf MK2 and MK3","description":"\u003cp\u003eKit for the front axle with the 16V brake: 256mm vented discs, calipers and caliper brackets. For Golf MK2 and MK3, Seat Córdoba and models sharing the same platform. Works both for restoring a worn 16V brake and for upgrading a MK2 that's running the small brake.\u003c\/p\u003e\u003cp\u003eIf you want to go a step further, the \u003ca href=\"\/en\/products\/g60-brake-conversion-kit-280-4x100-golf-mk2-mk3-corrado\"\u003e280mm G60 kit in 4x100\u003c\/a\u003e is the natural next step up. And if you just need a part of the 16V setup, the \u003ca href=\"\/en\/products\/metal-brake-lines-57cm-big-caliper-conversion-golf-mk1-mk2-mk3\"\u003esteel brake lines\u003c\/a\u003e are also available.\u003c\/p\u003e\u003cp\u003eNot sure which brake suits your car? We'll cover it in a \u003ca href=\"\/en\/products\/classic-vw-swap-project-consulting\"\u003econsultation\u003c\/a\u003e.\u003c\/p\u003e","brand":"Epytec","offers":[{"title":"Default Title","offer_id":59882390487388,"sku":"EPY-APA314","price":323.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0883\/5265\/3660\/files\/bremsen-umbausatz-16v-fr-vw-golf-2-3-seat-cordoba-256-mm-belftete-bremsscheiben-bremssttel-halter-APA314.jpg?v=1794523822"},{"product_id":"kit-frenos-delanteros-312-mm-anclaje-5x100-golf-mk3-cabrio-vento-eje-plus","title":"312mm Front Brake Kit with 5x100 Bolt Pattern for Golf MK3, Golf 4 Cabrio and Vento with Plus Axle","description":"\u003cp\u003eComplete kit for the front axle of Golf MK3, Golf 4 Cabrio and Vento with the Plus axle (VR6 and GTI), with 312mm discs and 5x100 bolt pattern. You get a considerably bigger brake while still running your usual 5x100 wheels.\u003c\/p\u003e\u003cp\u003eWith more disc it's worth stepping up the master cylinder too: the \u003ca href=\"\/en\/products\/25-4mm-brake-master-cylinder-no-abs-golf-mk1-mk2-mk3-corrado\"\u003e25.4mm master cylinder\u003c\/a\u003e is the go-to on non-ABS cars. If you're after even more, there's the 334mm kit with a twin-piston caliper. For drilled discs there are the \u003ca href=\"\/en\/products\/zimmermann-sport-312x25-drilled-discs-5x100\"\u003eZimmermann Sport 312x25 discs in 5x100\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eRemember you'll need a wheel of at least 15\" with enough clearance. We'll confirm it for you in a \u003ca href=\"\/en\/products\/classic-vw-swap-project-consulting\"\u003econsultation\u003c\/a\u003e.\u003c\/p\u003e","brand":"Epytec","offers":[{"title":"Default Title","offer_id":59882390520156,"sku":"EPY-APA327","price":508.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0883\/5265\/3660\/files\/vw-golf-3-vr6-gti-modelle-mit-plusachse-bremsen-lochkreis-umbausatz-5x100-vorderachse-312-mm-bremsscheibe-APA327.jpg?v=1794523823"},{"product_id":"kit-frenos-delanteros-334-mm-doble-piston-golf-mk3-vr6-gti-eje-plus","title":"334mm Front Brake Kit with Twin-Piston Caliper for Golf MK3 VR6 and GTI with Plus Axle","description":"\u003cp\u003eThe biggest kit in the range for the front axle of Golf MK3 VR6 and GTI with the Plus axle: 334mm discs with a twin-piston caliper. For cars running considerably more power than stock, or for track use, where the original brake quickly falls short.\u003c\/p\u003e\u003cp\u003eEpytec offers it for the Plus axle in both 5x100 and 5x112; confirm your bolt pattern when ordering. You'll need a big wheel with enough clearance for the 334mm disc. If you don't need quite this much, the 312x25 kit is simpler and cheaper.\u003c\/p\u003e\u003cp\u003eBefore fitting a brake this size it's worth checking your wheel, master cylinder and brake booster. We'll do that in a \u003ca href=\"\/en\/products\/classic-vw-swap-project-consulting\"\u003econsultation\u003c\/a\u003e.\u003c\/p\u003e","brand":"Epytec","offers":[{"title":"Default Title","offer_id":59882390618460,"sku":"EPY-APA329","price":711.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0883\/5265\/3660\/files\/bremsen-umbausatz-vorderachse-334-mm-doppelkolben-bremse-fr-vw-golf-3-vr6-gti-plusachse--5x100-5x112-APA329.jpg?v=1794523825"},{"product_id":"pinzas-traseras-g60-portapinzas-pastillas-conversion-disco-trasero-golf-corrado","title":"G60 Rear Calipers with Caliper Brackets and Pads for Rear Disc Conversion on Golf and Corrado","description":"\u003cp\u003eNew rear calipers, left and right, with their caliper brackets and a set of pads, for fitting or restoring the G60 rear disc brake on Golf and Corrado. It's the base for any rear disc conversion and fits many of Epytec's caliper adapters.\u003c\/p\u003e\u003cp\u003eIf you're converting a MK1 to rear disc, the \u003ca href=\"\/en\/products\/kit-de-conversion-de-frenos-de-disco-eje-trasero-vw-golf-1-2-3-freno-de-disco-4-x-100\"\u003e4x100 rear disc kit\u003c\/a\u003e includes everything. For handbrake cables on MK2 and MK3 there's the \u003ca href=\"\/en\/products\/cable-freno-mano-191609721d-golf-mk2-jetta-2-disco-trasero\"\u003e191609721D cable\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eConverting to rear disc and not sure exactly what you need? We'll list it out in a \u003ca href=\"\/en\/products\/classic-vw-swap-project-consulting\"\u003econsultation\u003c\/a\u003e.\u003c\/p\u003e","brand":"Epytec","offers":[{"title":"Default Title","offer_id":59882390651228,"sku":"EPY-APA215","price":242.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0883\/5265\/3660\/files\/bremssattel-bremssattelhalter-bremsbelge-vw-golf-corrado-g60-umbau-hinterachse-APA215.jpg?v=1794523825"},{"product_id":"latiguillos-freno-delanteros-metalicos-largos-conversion-g60-golf-mk1-mk2-mk3","title":"Long Approved Metal Front Brake Lines for G60 Brake Conversion on Golf MK1, MK2, MK3, Corrado and Passat","description":"\u003cp\u003ePair of braided metal brake lines, longer than stock, for the front axle when fitting a bigger brake, like the G60 on a Golf MK1. They fit Golf MK1, MK2 and MK3, Passat, Corrado, Jetta, Polo and Seat Toledo, and come with a part certificate (Teilegutachten).\u003c\/p\u003e\u003cp\u003eSince they don't expand like rubber ones, the pedal feels firmer and the feedback improves. If you're fitting big 4- or 6-piston calipers like Brembo or Porsche, there's a specific version for that. There are also the \u003ca href=\"\/en\/products\/metal-brake-lines-57cm-big-caliper-conversion-golf-mk1-mk2-mk3\"\u003e57cm brake lines\u003c\/a\u003e for big-caliper conversions.\u003c\/p\u003e\u003cp\u003eNot sure what length your conversion needs? We'll cover it in a \u003ca href=\"\/en\/products\/classic-vw-swap-project-consulting\"\u003econsultation\u003c\/a\u003e.\u003c\/p\u003e","brand":"Epytec","offers":[{"title":"Default Title","offer_id":59882390716764,"sku":"EPY-SF111","price":112.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0883\/5265\/3660\/files\/stahlflex-bremsleitung-vw-golf-1-2-3-g60-passat-scirocco-polo-corrado-jetta-umbau-g60-bremse-t5-t6-hinterachse-SF111.jpg?v=1794523826"},{"product_id":"latiguillos-freno-delanteros-metalicos-pinzas-brembo-porsche-golf-mk1-mk2-mk3","title":"Approved Metal Front Brake Lines for Brembo or Porsche 4- to 6-Piston Calipers on Golf MK1, MK2, MK3, Corrado and Passat","description":"\u003cp\u003ePair of braided metal brake lines, longer than stock, built for fitting big 4- to 6-piston calipers like Porsche Brembo or Audi TT RS on the front axle. They fit Golf MK1, MK2 and MK3, Passat, Corrado, Jetta, Polo and Seat Toledo, with a part certificate (Teilegutachten).\u003c\/p\u003e\u003cp\u003eFirmer pedal with no pressure loss from expansion. For Porsche 996 calipers there are the \u003ca href=\"\/en\/products\/porsche-996-caliper-adapters-312x25-disc-golf-mk3-corrado-passat-vr6\"\u003eadapters for the Plus axle\u003c\/a\u003e. If your conversion is to G60, the correct version is the G60 brake line set.\u003c\/p\u003e\u003cp\u003eFitting calipers at this level means checking your wheel, master cylinder and brake booster. We'll cover it in a \u003ca href=\"\/en\/products\/classic-vw-swap-project-consulting\"\u003econsultation\u003c\/a\u003e.\u003c\/p\u003e","brand":"Epytec","offers":[{"title":"Default Title","offer_id":59882390749532,"sku":"EPY-SF125","price":102.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0883\/5265\/3660\/files\/stahlflex-bremsleitung-vw-golf-1-2-3-g60-passat-scirocco-polo-corrado-jetta-brembo-porsche-ttrs-bremsen-umbau-SF125.jpg?v=1794523827"},{"product_id":"chapas-guardapolvo-traseras-para-conversion-a-disco-de-256-mm-en-golf-mk1-mk2-y-mk3-pareja","title":"Rear Dust Shields for 256mm Disc Conversion on Golf MK1, MK2 and MK3 (Pair)","description":"\u003cp\u003ePair of dust shields (ankerblech) for the rear axle of Golf MK1, MK2 and MK3 when fitting a 256mm disc. They protect the disc and caliper from water and dirt and give the conversion a factory-finished look, which is exactly what tends to get forgotten when going from drum to disc.\u003c\/p\u003e\u003cp\u003eIf your conversion is 230mm, there's the specific pair for that size. For the complete axle, the 256mm rear disc kits with compact bearing and the 256mm caliper brackets.\u003c\/p\u003e\u003cp\u003eWant to check what else you need to finish the axle properly? We'll cover it in a \u003ca href=\"\/en\/products\/classic-vw-swap-project-consulting\"\u003econsultation\u003c\/a\u003e.\u003c\/p\u003e","brand":"Special Parts","offers":[{"title":"Default Title","offer_id":59882395566428,"sku":"111.009.001SP","price":50.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0883\/5265\/3660\/files\/111.009.001SP.jpg?v=1794523893"},{"product_id":"chapas-guardapolvo-traseras-para-conversion-a-disco-de-230-mm-en-golf-mk1-mk2-y-mk3-pareja","title":"Rear Dust Shields for 230mm Disc Conversion on Golf MK1, MK2 and MK3 (Pair)","description":"\u003cp\u003ePair of rear dust shields for the 230mm disc conversion on Golf MK1, MK2 and MK3. They cover the disc from the inside, protect it from water and mud, and give the conversion the finish of a car that came that way from the factory.\u003c\/p\u003e\u003cp\u003eFor 256mm conversions there's the specific pair for that size. And if you haven't built the axle yet, the 230mm rear disc kits with compact bearing, in 4x100 or 5x100, include almost everything.\u003c\/p\u003e\u003cp\u003eNot sure between 230 and 256mm? We'll help you decide in a \u003ca href=\"\/en\/products\/classic-vw-swap-project-consulting\"\u003econsultation\u003c\/a\u003e.\u003c\/p\u003e","brand":"Special Parts","offers":[{"title":"Default Title","offer_id":59882395599196,"sku":"111.009.003SP","price":50.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0883\/5265\/3660\/files\/111.009.003SP.jpg?v=1794523894"},{"product_id":"kit-de-discos-y-pastillas-traseros-con-anillos-abs-y-rodamientos-anclaje-4x100-para-golf-mk1-mk2-y-mk3","title":"Rear Disc and Pad Kit with ABS Rings and Bearings, 4x100 Bolt Pattern, for Golf MK1, MK2 and MK3","description":"\u003cp\u003eMaintenance and service kit for the rear disc brake on Golf MK1, MK2 and MK3 with 4x100 bolt pattern. The good part is what it includes: besides discs and pads, it comes with the ABS rings and bearing sets, which on these cars sit inside the disc and are worth replacing at the same time.\u003c\/p\u003e\u003cp\u003eIt's for axles that already have a rear disc, either stock or from a G60-caliper conversion. If you're still on drums and want to switch to disc, what you need is the \u003ca href=\"\/en\/products\/kit-de-conversion-de-frenos-de-disco-eje-trasero-vw-golf-1-2-3-freno-de-disco-4-x-100\"\u003e4x100 rear disc conversion kit\u003c\/a\u003e or the compact-bearing kits.\u003c\/p\u003e\u003cp\u003eWant to upgrade the rear brake while you're at it? We'll advise you in a \u003ca href=\"\/en\/products\/classic-vw-swap-project-consulting\"\u003econsultation\u003c\/a\u003e.\u003c\/p\u003e","brand":"Special Parts","offers":[{"title":"Default Title","offer_id":59882395763036,"sku":"101772","price":86.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0883\/5265\/3660\/files\/101772.jpg?v=1794523896"},{"product_id":"anillo-de-abs-trasero-para-golf-mk2-mk3-y-passat-35i","title":"Rear ABS Ring for Golf MK2, MK3 and Passat 35i","description":"\u003cp\u003eABS toothed ring for the rear axle of Golf MK2 and MK3, Passat 35i and Polo 6N, among others. It's what sends the signal to the ABS sensor; when it rusts or cracks, you start getting warning lights and odd braking behavior.\u003c\/p\u003e\u003cp\u003eIt's also the part you need if you're fitting ABS to a rear axle that didn't have it, or if you're changing rear discs and the old ring won't come off in one piece. If you're renewing the whole rear brake, the 4x100 rear disc and pad kit already includes the rings and bearings.\u003c\/p\u003e\u003cp\u003eFitting ABS to a classic? We'll take our time with it in a \u003ca href=\"\/en\/products\/classic-vw-swap-project-consulting\"\u003econsultation\u003c\/a\u003e.\u003c\/p\u003e","brand":"Special Parts","offers":[{"title":"Default Title","offer_id":59882395795804,"sku":"111.026.006SP","price":9.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0883\/5265\/3660\/files\/111.026.006SP.jpg?v=1794523896"},{"product_id":"placas-separadoras-aluminio-discos-vag-modernos-golf-mk1-mk2-mk3","title":"Aluminum Spacer Plates for Fitting Modern VAG Discs on Golf MK1, MK2, MK3 and Golf 4","description":"\u003cp\u003eHigh-strength aluminum plates that fit between the hub and the brake disc, with the centering ring included. They let you fit discs from the more modern VAG range, which have a greater overall height and a larger center bore and, without this, would rub against the knuckle.\u003c\/p\u003e\u003cp\u003eThe disc sits pushed outward just enough to work properly with its caliper. They're widely used in conversions to Golf 4, Golf 5 and Audi brakes on Golf MK1 to MK3, together with caliper adapters like the \u003ca href=\"\/en\/products\/caliper-adapters-312x25-disc-golf-5-gti-caliper-golf-mk1-caddy\"\u003eadapters for the 312x25 disc\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eNot sure if your conversion needs them? We'll tell you in a \u003ca href=\"\/en\/products\/classic-vw-swap-project-consulting\"\u003econsultation\u003c\/a\u003e.\u003c\/p\u003e","brand":"Epytec","offers":[{"title":"Default Title","offer_id":59882397794652,"sku":"EPY-1048","price":109.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0883\/5265\/3660\/files\/zentrierung-und-spurplatte-unter-bremsscheiben-gesamthhe-ndern-golf-1-2-3-4-audi-scheiben-1048.jpg?v=1794523907"},{"product_id":"placas-separadoras-8-mm-discos-mercedes-golf-mk3-anclaje-5x100-5x112","title":"8mm Spacer Plates for Fitting Mercedes Discs on Golf MK3 and Golf 4 with 5x100 or 5x112 Bolt Pattern","description":"\u003cp\u003ePair of 8mm high-strength aluminum plates that fit between the hub and the disc. They let you fit Mercedes discs, which have greater overall height and a smaller center bore, on Golf MK3, Golf 4 and Audi with 5x100 or 5x112 bolt pattern, without the disc rubbing against the knuckle.\u003c\/p\u003e\u003cp\u003eThe disc moves out 8mm toward the wheel, so check that your wheel has clearance. They're used in big-brake conversions with Porsche or Audi calipers, together with adapters like the \u003ca href=\"\/en\/products\/porsche-996-caliper-adapters-312x25-disc-golf-mk3-corrado-passat-vr6\"\u003ePorsche 996 adapters for the Plus axle\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eFitting a big brake and not sure which disc and caliper combination suits you? We'll cover it in a \u003ca href=\"\/en\/products\/classic-vw-swap-project-consulting\"\u003econsultation\u003c\/a\u003e.\u003c\/p\u003e","brand":"Epytec","offers":[{"title":"Default Title","offer_id":59882397860188,"sku":"EPY-198","price":123.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0883\/5265\/3660\/files\/spurplatte-unter-bremsscheiben-gesamthhe-golf-3-4-und-die-audi-baureihe-mit-5x100-und-5x112-lochkreis-8mm-bremsen-umbau-198.jpg?v=1794523908"},{"product_id":"anillo-centrador-acero-discos-vw-modernos-bujes-golf-mk1-mk2-mk3-corrado","title":"Steel Centering Ring for Fitting Modern VW Discs on Golf MK1, MK2, MK3 and Corrado Hubs","description":"\u003cp\u003eSteel centering ring for brake conversions. You need it when fitting a disc with a larger center bore than the hub, for example more modern VW discs on Golf MK1, MK2 and MK3, VR6, G60 or Corrado hubs. It keeps the disc perfectly centered with no vibration.\u003c\/p\u003e\u003cp\u003eIt's typical in rear axle conversions with R32 or S3 calipers, like with the \u003ca href=\"\/en\/products\/rear-caliper-adapters-256x22-disc-r32-s3-caliper-golf-mk2-mk3-corrado\"\u003eR32 and S3 rear caliper adapters\u003c\/a\u003e. If the disc you're fitting is the front G60 disc onto the rear axle, the correct ring is the other model in the range.\u003c\/p\u003e\u003cp\u003eNot sure which center bore you need? We'll tell you in a \u003ca href=\"\/en\/products\/classic-vw-swap-project-consulting\"\u003econsultation\u003c\/a\u003e.\u003c\/p\u003e","brand":"Epytec","offers":[{"title":"Default Title","offer_id":59882397925724,"sku":"EPY-ZR-57X68-STB","price":25.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0883\/5265\/3660\/files\/zentrierring-fr-radnaben-golf-corrado-g60-vr6-16v-corrado-hinterachse-bremsanlage-r32-s3-ZR-57X68-STB.jpg?v=1794523909"},{"product_id":"anillo-centrador-acero-discos-delanteros-g60-vr6-eje-trasero-golf-corrado","title":"Steel Centering Ring for Fitting Front G60 or VR6 Discs on the Rear Axle of Golf MK1, MK2, MK3 and Corrado","description":"\u003cp\u003eSteel centering ring for fitting the front-axle discs from Golf 1, 2 and 3 VR6, G60, GTI 16V or Corrado onto the rear axle, since their center bore is larger than the rear hub's. With it the disc stays well centered and vibration-free.\u003c\/p\u003e\u003cp\u003eIt's the part that goes with rear conversions using a 280mm disc and Golf 4 R32 or Audi S3 calipers. For more modern VW discs on classic hubs there's a different, specific ring. Also check out the \u003ca href=\"\/en\/products\/dual-bolt-pattern-rear-hub-carriers-5x100-5x112-golf-mk1-mk2-mk3-corrado\"\u003edual bolt pattern rear hubs\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eNot sure which ring and which hubs your rear axle needs? We'll clarify it in a \u003ca href=\"\/en\/products\/classic-vw-swap-project-consulting\"\u003econsultation\u003c\/a\u003e.\u003c\/p\u003e","brand":"Epytec","offers":[{"title":"Default Title","offer_id":59882397958492,"sku":"EPY-343-RI","price":25.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0883\/5265\/3660\/files\/zentrierring-fr-radnaben-golf-corrado-g60-vr6-16v-corrado-hinterachse-bremsanlage-r32-s3-343-RI-1X.jpg?v=1794523909"},{"product_id":"anillos-adaptadores-abs-mark-20-bujes-polo-9n-conversion-frenos-r32-golf-mk3","title":"Mark 20 ABS Adapter Rings for Polo 9N Rear Hubs in R32 Brake Conversion on Golf MK3","description":"\u003cp\u003eAdapter rings for Polo 9N rear hubs that let you reuse the Golf MK3's Mark 20 ABS sensor ring. Needed when converting a Golf 3 rear axle to R32 or S3 brakes with a 256x22 disc, where Polo 9N hubs are fitted.\u003c\/p\u003e\u003cp\u003eThis way you keep the original ABS working without having to source new sensors or rings. They're used together with the \u003ca href=\"\/en\/products\/rear-caliper-adapters-256x22-disc-r32-s3-caliper-golf-mk2-mk3-corrado\"\u003eR32 and S3 rear caliper adapters\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eWant to go over the whole rear conversion with ABS? We'll cover it in a \u003ca href=\"\/en\/products\/classic-vw-swap-project-consulting\"\u003econsultation\u003c\/a\u003e.\u003c\/p\u003e","brand":"Epytec","offers":[{"title":"Default Title","offer_id":59882398024028,"sku":"EPY-903","price":50.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0883\/5265\/3660\/files\/adapterring-fr-golf-3-polo-9n-nabe-abs-umbau-mark-20-fr-r32-bremsanlage-hinten-903.jpg?v=1794523910"},{"product_id":"discos-de-freno-de-239-mm-macizos-con-anclaje-5x100-para-golf-mk1-y-mk2-delante-y-golf-mk3-detras-pareja","title":"239mm Solid Brake Discs with 5x100 Bolt Pattern for Golf MK1 and MK2 Front, Golf MK3 Rear (Pair)","description":"\u003cp\u003ePair of solid 239mm discs with 5x100 bolt pattern. Up front they fit Golf MK1 and MK2 (and Audi 80 B1 and B2) with the stock caliper; out back, Golf MK3 and Passat VR6 Syncro. It's the base part for switching to 5x100 without touching the calipers.\u003c\/p\u003e\u003cp\u003eIf you just need one part or want a spare, this is the pair; if you want the full bolt pattern conversion, the 4x100 to 5x100 kits for MK1 and MK2 already include discs, hubs, drums and bearings. For the front hub on MK1, the \u003ca href=\"\/en\/products\/front-hub-carriers-5x100-golf-mk1-caddy-scirocco\"\u003e5x100 hubs for Golf MK1\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eNot sure which disc your car runs? We'll clarify it in a \u003ca href=\"\/en\/products\/classic-vw-swap-project-consulting\"\u003econsultation\u003c\/a\u003e.\u003c\/p\u003e","brand":"Special Parts","offers":[{"title":"Default Title","offer_id":59882403168604,"sku":"111.015.017SP","price":81.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0883\/5265\/3660\/files\/111.015.017SP.jpg?v=1794523976"},{"product_id":"mangones-traseros-freno-disco-g60-16v-golf-mk1-mk2-mk3","title":"Rear Stub Axle, Hub and Knuckle for Fitting G60 or 16V Disc Brake on Golf MK1, MK2 and MK3 (Pair)","description":"\u003cp\u003ePair of new rear stub axle, hub and knuckle assemblies that bolt onto the rear axle and let you fit the Golf 2 and Golf 3 G60 or 16V rear disc brake as-is, with its caliper brackets, calipers and discs, with no cutting or welding.\u003c\/p\u003e\n\u003cp\u003eThey fit Golf MK1 and, on Golf MK2 and MK3, only if the car runs stock drums. They also work as the base for the big rear brake kits. The handbrake cable you need is the 191609721D (1840\/1220mm).\u003c\/p\u003e\n\u003cp\u003eIf you want it all done in one go, there's the complete \u003ca href=\"\/en\/products\/230mm-rear-disc-brake-kit-compact-bearing-4x100-golf-mk1-mk2-mk3\"\u003e230mm rear disc brake kit\u003c\/a\u003e, and the \u003ca href=\"\/en\/products\/cable-freno-mano-191609721d-golf-mk2-jetta-2-disco-trasero\"\u003e191609721D handbrake cable\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNot sure which calipers or master cylinder to pair it with? We'll cover it in the \u003ca href=\"\/en\/products\/classic-vw-swap-project-consulting\"\u003econsultation\u003c\/a\u003e.\u003c\/p\u003e","brand":"Epytec","offers":[{"title":"Default Title","offer_id":59882505470300,"sku":"EPY-313","price":83.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0883\/5265\/3660\/files\/vw-golf-1-golf-2-golf-3-g60-16v-bremsscheiben-umbau-hinterachse-bremssattel-adapter-achszapfen-bremse-313.jpg?v=1794524489"}],"url":"https:\/\/vwheelswap.com\/en\/collections\/golf-mk3-brakes.oembed?page=2","provider":"vwheelswap","version":"1.0","type":"link"}