BC Racing BR RN coilovers for Golf MK2, Golf MK3, Jetta 2 and Vento 1983 to 1999
suspension

BC Racing BR RN coilovers for Golf MK2, Golf MK3, Jetta 2 and Vento 1983 to 1999

€1.208,90
The BC Racing BR series for Golf MK2, Golf MK3, Jetta 2 and Vento 1983 to 1999: monotube damper with a 46 mm piston in a 53 mm body, ride height adjustment independent from spring preload and 30 position combined comp...
Quantity
★ 24–48h shipping for parts in stock. For made-to-order parts, check the lead time before buying.
★ Technical advice included with your purchase.

Product description

The BC Racing BR series for Golf MK2, Golf MK3, Jetta 2 and Vento 1983 to 1999: monotube damper with a 46 mm piston in a 53 mm body, ride height adjustment independent from spring preload and 30 position combined compression and rebound adjustment. It is the same application for MK2 and MK3.

Top mounts: important on this version

The RN type comes without front top mounts and with aluminium rear top mounts with a rubber centre. The original front top mounts are reused, so if yours are old it makes sense to fit new ones together with the coilovers.

Which spring rate to choose

The first number is the front spring and the second the rear, in kg/mm. It does not tell you how many centimetres the car drops or how much weight it takes.

  • 5/2.5: BC's recommended rate for most street MK2 and MK3. Our first choice.
  • 5/3, 5/4, 6/4 and 6/5: a bit firmer, for heavier cars or sportier use, such as a MK3 VR6 or a swapped MK2.
  • 7/5 and above: track setups; for the street only with a specific reason.
  • Extra Low: shorter damper or spring to go lower than the standard kit, not just stiffer.

Stiffer does not mean more grip, and a stiffer spring does not fix a rubbing wheel. If your car has a swap we do not choose the rate by horsepower, but by the weight and its front to rear split.

How low does it go

It depends on the real axle weights, the wheel and the tyre, so we do not give a generic figure. Before ordering tell us engine and gearbox, axle weights if you have them, current suspension, the ride height you want and wheel size with width and ET.

If the car sits very low, see the 30 mm ball joint spacers to recover geometry, and for more track use the BC Racing DS.

Not sure about the spring rate or the ride height? Send us your car's details before ordering or we work it out with you in a consulting session.

You might also like

View collection →